Page 409 - Workshop Manual - Tunland (2017)
P. 409
DIAGNOSTICS - WIPER & WASHER 04-271
3 . Check the harness and connectors (low speed relay of front wiper - BCM control
unit)
(a) Ignition Switch: OFF.
(b) Pull out the low speed relay R10 of front wiper.
(c) Disconnect connector C035 of BCM control 04
unit.
ftwxd041025
(d) Measure the electrical resistance based on
the value in the following form.
Standard electrical resistance (check
whether there existent an open circuit)
Multimeter connection
C035 Specified value
stitch
R10（2）-C035 ＜ 2 Ω
R10 （D23）
ftwxd041370
Check whether the result is normal?
Yes> go to step 4
No > Maintenance or replace harness.
4 . Check the combination switch (wiper).
(a) Ignition Switch: OFF.
