Page 412 - Workshop Manual - Tunland (2017)

04-274 DIAGNOSTICS - WIPER & WASHER

(d) Measure the electrical resistance based on
the value in the following form.
Standard resistance (check whether there
is an open circuit)

Multimeter connection Standard value
04
C012（2）-C035（D2） ＜ 2 Ω
C035

C012

ftwxd041372

Check whether the result is normal?

Yes> Replace BCM control unit.
No > Maintenance or replace harness.

7 . Check the harness and connectors (low speed relay of front wiper – front washer
motor)
(a) Ignition Switch: OFF.
(b) Pull out the low speed relay R10 of front wiper.

(c) Disconnect the connector A007 of front wiper
motor.

ftwx651010