Page 411 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - WIPER & WASHER 04-273

(c) Measure the electrical resistance based on
the value in the following form.
Standard resistance (check whether there
is an open circuit)

C012 Multimeter connection Standard value
04
C012 (3) - ground ＜ 2 Ω

ftwxd041371

Check whether the result is normal?
Yes> go to step 6
No > Maintenance or replace harness.

6 . Check the harness and connectors (combination switch - BCM control unit)
(a) Ignition Switch: OFF.

(b) Disconnect the connector C012 of
combination switch (wiper).

ftwx641020

(c) Disconnect connector C035 of BCM control
unit.

ftwxd041025