Page 405 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - WIPER & WASHER 04-267

9 . Check the harness and connectors (high speed relay of front wiper – front wiper
motor)
(a) Ignition Switch: OFF.
(b) Pull out the high speed relay R11 of front wiper.

(c) Disconnect the connector A007 of front wiper 04
motor.

ftwx651010

(d) Measure the electrical resistance based on
the value in the following form.
Standard resistance (check whether there

R11 A007 is an open circuit)
Multimeter connection Standard value

R11（5）-A007（3） ＜ 2 Ω

ftwxd041368

Check whether the result is normal?

Yes> go to step 10
No > Maintenance or replace harness.

10 . Check the harness and connectors (front wiper motor- ground)
(a) Ignition Switch: OFF.
(b) Pull out the high speed relay R11 of front wiper.