Page 402 - Workshop Manual - Tunland (2017)

04-264 DIAGNOSTICS - WIPER & WASHER

(d) Measure the electrical resistance based on
the value in the following form.
Standard electrical resistance (check
whether there existent an open circuit)

C035 Multimeter connection
04 stitch Specified value

R10（1）-C035
（D23）
R10 ＜ 2 Ω

ftwxd041365

Check whether the result is normal?
Yes> go to step 6
No > Maintenance or replace harness.

6 . Check the combination switch (wiper).
(a) Ignition Switch: OFF.

(b) Disconnect the connector C012 of
combination switch (wiper).

ftwx641020

(c) Check the combination switch (wiper).

Standard voltage

Multimeter
Specified
Conditions connection
value
stitch
Switch off the 1-3
wiper switch ≥ 1 MΩ
Turn on the
low-speed gear 1-3 ＜ 2 Ω
of wiper switch