Page 401 - Workshop Manual - Tunland (2017)
P. 401

DIAGNOSTICS - WIPER & WASHER                             04-263

                                                           (d)    Measure the electrical resistance based on
                                                                  the value in the following form.
                                                                  Standard electrical resistance (check
                                                                  whether there existent an open circuit)

                           C035                             Multimeter connection
                                                                                           Specified value
                                                                      stitch                                         04
                                                            R11（2）-C035（D24）                    ＜ 2 Ω
                           R11







                                                 ftwxd041364


                 Check whether the result is normal?
                 Yes> go to step 5
                 No > Maintenance or replace harness.


                 5 .    Check the harness and connectors (low speed relay of front wiper - BCM control
                        unit)
                 (a)    Ignition Switch: OFF.
                 (b)    Pull out the low speed relay R10 of front wiper.

                                                           (c)    Disconnect connector C035 of BCM control
                                                                  unit.














                                                 ftwxd041025
   396   397   398   399   400   401   402   403   404   405   406