Page 403 - Workshop Manual - Tunland (2017)

DIAGNOSTICS - WIPER & WASHER 04-265

Check whether the result is normal?

Yes> go to step 7
No > Replace the combination switch.

7 . Check the harness and connectors (combination switch - ground)
(a) Ignition Switch: OFF. 04

(b) Disconnect the connector C012 of
combination switch (wiper).

ftwx641020

(c) Measure the electrical resistance based on
the value in the following form.
Standard resistance (check whether there
is an open circuit)

C012 Multimeter connection Standard value

C012 (3) - ground ＜ 2 Ω

ftwxd041366

Check whether the result is normal?

Yes> go to step 8
No > Maintenance or replace harness.

8 . Check the harness and connectors (combination switch - BCM control unit)

(a) Ignition Switch: OFF.