Page 516 - Workshop Manual - Tunland (2017)

04-378 DIAGNOSTICS - LIGHTING SYSTEM

(e) Measure the electrical resistance based on
the value in the following form.
Standard electrical resistance (check
A011
whether there existent an open circuit)
1 2 3 Multimeter connection Standard value
4 5 6
04
A011 (5) - ground
＜ 2 Ω
A003 A003 (5) - ground

1 2 3
4 5 6

ftwxd041001

Check whether the result is normal?
Yes> go to step 7
No > Maintenance or replace harness.

7 . Check the harness and connectors (driving light relay - BCM control unit)
(a) Ignition Switch: OFF.
(b) Unplug the relays R6 of driving lights

(c) Disconnect connector C035, BCM control unit.

ftwxd041025

(d) Measure the electrical resistance based on
the value in the following form.
Standard electrical resistance (check
C035 whether there existent an open circuit)

Multimeter connection Standard value

R6(1)-C035（D14） ＜ 2 Ω

R6

ftwxd041389