Page 483 - Tar River Updated
P. 483
PARTS CATALOG
Operating Instructions for Optional Installing Optional Scraper Kit
Tongue and Wheel Kit. (Cont.) BCP1816, BCP2416, BCP3616
cause serious injury. Follow these steps to install the Optional Scraper
Kit.
4. Position yourself on the opposite side of the
Cultipacker and rotate the tongue into the operating 1. Mount the Scraper Bar (Ref. 1) to the Scraper
or transport position as shown in Figure 19. Bar Mount Lug welded to the Cultipacker Gang
Hanger using Carriage Bolt, 1/2" x 1 1/2" (Ref. 3)
5. Do not transport faster than 10 mph. and Flange Lock Nut, 1/2" (Ref. 4).
6. Avoid sharp turns with prime mover to be sure not 3. Attach the Scraper Blades (Ref. 2) to the
to contact tires with the tongue. Scraper Bar (Ref. 1) using Carriage Bolt, 1/2" x 1
1/2" (Ref. 3) and Flange Lock Nut, 1/2" (Ref. 4).
7. Do not operate the Cultipacker in reverse to
prevent damage to the unit. 4. Tighten each nut to the torque chart on page
33.
8. To hitch Cultipacker to tractor, remove the parking
stand and store in the operating position. Place clevis
onto drawbar and insert drawbar pin.
Operation Transport
Figure 19.
