Page 1177 - Flipbook_SolidDesignSoutheast2020
P. 1177
Gravity Metal Detector System—Operator Setup Manual
1.3 Installation Tools
The installation of your Stealth Detector system will only require general tools – there are no special tools required.
1.4 Installation Location
The location of the Metal Detector is very important. The metal detector must be positioned on a solid surface/frame.
The Metal Detector must be set up in an area free from radiated electromagnetic interference and must be connected
to a power supply that is free from line (mains) borne interference.
Environmental Conditions: Temperature range ‐5 C to +50 C (23 F to 122 F)
Gravity detectors are built rugged to withstand the harshest production environments with IP69K certified Statinless
Steel construction.
1.5 Handling
The Stealth system’s weight depends on the application; the unit is designed to be robust and can be extremely heavy
in some cases.
Where the unit has to be lifted, it is strongly recommended that suitable lifting devices be used; keep the unit low to
the ground in order to avoid a dangerous topple‐over effect.
WARNING!
Do not use the aperture as a means of lifting the Detector system via forklift. Use
appropriate weight capacity straps to support the unit if lifting by forklift and
hook the straps securely underneath both side of the mounting frame.
Page 6 www.fortresstechnology.com
