Page 1202 - Flipbook_SolidDesignSoutheast2020

Gravity Metal Detector System—Operator Setup Manual

3.8 Product Setup

The Stealth allows you to store settings for up to 99 different products in its memory. Product settings (including
sensitivity and calibrated phase point) are instantly retrieved upon changing from one product to another.

3.8.1 Renaming Products

The Main Menu displays the name of the product currently being run; by default the Product Name is set to PRODUCT1
and no additional products are set up. To change the default product name to a more suitable or descriptive one, follow
these steps:
1. Press the SELECT PRODUCT key on the right side of the Stealth control panel.

2. Press one of the lower Soft Keys (S2 or S4) alongside the product name to edit the name.
3. A flashing cursor will appear on the first letter; press the UP/DOWN arrow keys (+/‐) to change the
alphanumeric characters. The LEFT/ RIGHT arrow keys are used to scroll the cursor between characters.

4. Press ENTER to confirm.

3.8.2 Saving Master Product

After you have followed all the Quick Start procedures and renamed your product, it is strongly recommended that you
save the settings. With the Backup you can easily restore the saved product setup configuration at any time. This
capability proves to be valuable in cases where operator changes have a negative effect on the system’s performance
as it is easy to revert back to the stored settings.
To save a Master product record follow these steps:

1. Press the SELECT PRODUCT key on the right side of the Stealth panel.

2. Press S3 to enter the Product Edit submenu.

Product: 1 Edit

Name: PRODUCT1

3. Press S4 to enter the Backup Submenu.

Copy Defaults

Delete Backup

4. Press S2 to save the current product settings as the Master settings (also known as the Factory Settings).

Backup

Save Restore

www.fortresstechnology.com Page 31