Page 252 - Pontiac Catalog

64-79 Manual Transmission - Bell Housing/Clutch

GM Manual Transmission

INL12799 INL12801
INL10119 Throwout Bearing
Bell Housing Bolts
Pn# - INL12799 -1pc $45.00 Ea 64-67 Clutch Frame Bracket
Pn# - INL10290 -8pc $14.99 set 1964-79 GM Manual Transmission High Performance Throwout Pn# - INL13398 - 1pc $14.00 Ea
68-79 Muncie Transmission to Bell Housing Bolts, 8pc . These Bearing. The best brand in the world when it comes to bearings 1964-67 GM A-body Chevelle, GTO, 442, GS Counter Shaft
hold the transmission to the bell housing. made in the USA. Frame Z-bar Clutch Bracket. Welded to frame and holds up the
Engine Pilot Bearing end of the countershaft Z-bar.
Pn# - INL10119 -4pc $5.00 set
64-79 GM 4 speed bell housing plastic plugs 4 pc set - These Pn# - INL12801 -1pc $27.00 Ea 64-67 Z Bar Spring Brk
were used on all bell housing in the holes that were not used. Pn# - INL12901 - 1pc $12.00 Ea
1964-79 Pontiac V8 Engine Pilot Bearing, Ball Bearing. This is
the bearing in the back of the crank used to support the manual 1964-67 GM A-body Manual Transmission Weld on Z Bar Return
transmission shaft. Spring Bracket. Used to hold the Z bar return spring.
INL15011
INL10289
Pn# - INL10289 - 6pc $18.00 set
68-72 Muncie Bell Housing to Engine Bolts. These are the bolts
that hold the transmission bell housing to the back side of the 68-72 Z-Bar Frame Bracket Z Bar Stud Engine Block
engine block.
Pn# - INL15011 - 1pc $1.75 Ea Pn# - INL14824 1pc $14.00 Ea Pn# - INL10936 - 1pc $12.00 Ea
9/16 Hex Head - 1.584 OAL, 5/8-16 Thread, Anchor Head 1968-72 GM A-body (GTO, 442, GS) Clutch Z-Bar Cross Shaft 1964-77 GM Ball Stud Clutch Z Bar to Engine Block with Seal.
Used to hold the 4 speed Z bar to the engine block.
Frame Pivit Bracket. Holds the end of the cross shaft at the frame.
Marking, 1964-81 Trans Bell Housing, Pontiac Intake, Chevrolet This is specific to the BOP - chevy is a different one.
Intake, Finish: Phosphate

INL12235 INL12236 INL12799 INL12799
Z-Bar Frame Bracket Bolts 67-69 Engine Block Ball Stud
INL10520 INL13097
Pn# - INL12235 - 2pc $2.50 Pair Pn# - INL14396 - 1pc $15.00 Ea
Clutch Fork Boot 1968-72 GM A-body Clutch Z-Bar Counter Shaft Frame Bracket 1967-69 Pontiac Firebird Manual Transmission Engine Block Z-
Pn# - INL10520 -1pc $12.00 ea. Bolts - Course thread. Used to hold Z-bar bracket at frame. bar Ball Stud. Overall Length 2 13/16"
64-79 GM 4 Speed Bell Housing Clutch Fork Rubber Boot. Pn# - INL12236 - 2pc $2.50 Pair 70-81 Engine Block Ball Stud
Located in the side of the bell housing - original usually gets torn. 1968-72 GM A-body Clutch Z-Bar Counter Shaft Frame Bracket Pn# - INL14397 - 1pc $15.00 Ea
Bell Housing Fork Fitting Bolts - Fine thread. Used to hold Z-bar bracket at frame. 1970-79 & 81 Pontiac Firebird Trans Am Manual Transmission
Engine Block Z-bar Ball Stud. Overall Length 2 3/16"
Pn# - INL13097 - 1pc $14.50 Set
1962-87 GM Bell Housing Clutch Fork Fitting. 1964-72 GM A-
body Chevelle / GTO / 442 / GS, 1967-81 F-body Camaro / INL12817
Firebird, 1962-79 X-Body Nova / Ventura. All GM Cars and
Trucks with manual trans.
INL12816
70-81 F-body Clutch Fork 10 Spline Clutch Tool
Pn# - INL15012 - 1pc $18.99 Ea Pn# - INL12816 - 1pc $4.50 Ea
INL12986 INL13631 1970-81 GM F-body Camaro / Firebird, Manual Transmission Clutch Alignment Tool - 10 Spline - Used on all manual
Clutch Z-bar Countershaft Frame Pivit Bracket. Bolts to the side transmissions to align the clutch. 1958-69 use the 10 Spline.
64-72 MT Clutch Fork of the frame to hold the ball pivot. 26 Spline Clutch Tool
Pn# - INL12986 - 1pc $46.00 Ea Pn# - INL12817 - 1pc $4.50 Ea
1964-1972 GM A-body, 67-69 F-body, 68-74 X-body Manual Trans
Clutch Fork. This part differs in appearance from the original, the Clutch Alignment Tool - 26 Spline - Used on all manual
transmissions to align the clutch. 1970-up use the 26 Spline.
anti-rattle spring hold will have to be drilled. For 64-65 cars
grooves will need to be cut into fork for return spring. Our professional staff of
Factory Clutch Fork sales representatives, tech
Pn# - INL13631 - 1pc $59.00 Ea Pressure Plate Bolts support team and engineers
1964-77 GM A-body GTO, Cutlass, Skylark, 69-77 Grand Prix, Pn# - INL12800 -12pc $8.00 Set can answer any brake related
1967-79 Firebird, Trans Am. 1971-74 Ventura, 1973-74 Omega / 1964-79 GM Pressure Plate to Flywheel Bolt Set. Correct TR question - Give us a call.
Apollo. Manual Transmission Clutch Fork GM 9787069. This is grade 5 bolts. Used to hold the pressure plate and clutch
not the chevy one this is factory correct, with center push hole. assembly to the flywheel. New Products In Red

www.Inlinetube.com