Page 572 - Quicksilver Accesories Guide 2019

SMARTCRAFT RIGGING

NMEA2000 COMPONENTS NMEA 2000 STARTER KIT

NMEA2000 6-WAY JUNCTION BOX

8M0110642
Kit includes NMEA 2000 power harness, 1 male termination resistor, 1 female
termination resistor and a "T" connector
84-8M0138268 Whenever a NMEA2000 backbone is required, these are the basic components
Rather than using individual T's, use a rock‑solid distribution block to build your required to start that architecture
NMEA2000 network. Has 6 individual connectors.
Works with any NMEA2000 standard 5 pin connector and can support both male NMEA 2000 POWER HARNESS
and female termination resistors.
MALE - FEMALE 5-PIN EXTENSION HARNESS SMARTCRAFT RIGGING

84-8M0114012
NMEA 2000 power harness. Overmolded NMEA 2000 connector with fused
harness.
84-879171T01 Used to provide power to the NMEA 2000 bus.
0.5 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H
bus for IMU/GPS signal. NMEA2000 "T" CONNECTOR
84-879171T02
1 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus
for IMU/GPS signal.
84-879171T03
2 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus
for IMU/GPS signal.
84-879171T04
3 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus
for IMU/GPS signal.
84-879171T05
4 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus 8M6004829
for IMU/GPS signal.
NMEA2000 architecture requires "T" connectors to connect cable drops from the
84-879171T06 network to devices.
5 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus Useful for any NMEA2000 network application
for IMU/GPS signal.
NMEA2000 RESISTOR - FEMALE
84-879171T07
6 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus
for IMU/GPS signal.
84-879171T08
7 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus
for IMU/GPS signal.
84-879171T09
8 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus
for IMU/GPS signal.
84-879171T10
9 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus
for IMU/GPS signal. 8M6004831
84-879171T11 NMEA2000 Resistor ‑ Female pins
10 meter long harness to extend any NMEA 2000 backbone or Mercury CAN H bus NMEA2000 networks require two termination resistors: one male and one female
for IMU/GPS signal.

Not all parts listed are available for the European, C.I.S., Africa and Middle East Markets. 565
For more information, please contact your local Mercury, Mariner, MerCruiser or
Quicksilver Office.