Page 45 - Attwood Marine Products Collection 2020

PLUG-IN ALL-ROUND LIGHT OVERVIEW

Attwood offers a selection of durable, stowaway, pole-mounted lights. Plug-in pole lights are available in socket styles to fit
most Attwood’s 2- and 3-pin bases, and competitive brands of bases when the 2- or 3-pin locking-collar pole is specified.
POLE LIGHT SELECTION
Simply choose the style of light head and lens you need and select the pole style to fit your existing base.
Or select a matching base best suited to your installation location. Black pole option available upon request.

For Attwood
standard
bases
Locking-collar
with universal fit
for Attwood &
competitive bases
LOCKING-COLLAR POLE OR STANDARD POLE
WITH UNIVERSAL FIT

Locking-collar poles offer universal fit allowing Standard pole is used on Attwood
customers to use them with a wide variety of all-round, masthead, transom, and
Attwood 2- and 3-pin straight or angled bases. bi-color pole lights. Fits all Attwood
They also work as replacements in competitive standard (non-locking-collar) 2- and
®
bases, including Perko brand bases. 3-pin contact bases.

2-MILE ALL-ROUND LIGHTS LED ANTI-GLARE Frosted Globe Lights
ANTI-GLARE LIGHTS Attwood’s standard Frosted Globe All-Round light is
Attwood all-round lights also available. Offering 360º visibility.
offer 2-mile, 360° FROSTED GLOBE LIGHTS
visibility and are suitable Attwood offers a choice of all-round lights — Anti- One meter
on boats up to 39.4 Glare and Frosted Globe. Select the head, pole, and, or 39-3/8"
feet (12 meters). Power base style that best suit your installation location and
vessels less than 39.4 eliminate driver glare. One-Meter Regulation
feet may show a single All-round light must be a minimum of one meter (39-
all-round light in lieu of a Traditional and LED Anti-Glare Lights 3/8”) above the red/green sidelights on boats under
separate masthead and Attwood’s Anti-Glare All-Round light goes beyond 12 meters (39.4 ft.). One meter must be
stern light. Attwood all- current regulations to reduce the danger of on-board the height separation measured from bulb filament
round lights are available in a variety of head, pole, glare. The precision lens focuses the light beam centers.
and base styles to fit most boats and installation to the horizon where it’s needed–360º without
locations. On boats under 12 meters, the all-round diffusion–keeping it out of the driver’s field of view. Note: Frosted globe pole lights may be used
light is the most important navigation light because it It allows the operator to see while being sure the with straight and angled bases. Unarticulated
can be seen by others from any direction. boat is seen.The bottom aperture eliminates glare by anti-glare pole lights must be selected to match the
cutting off the light beam at 7.5º below horizontal, appropriate straight or angled base.
so it’s out of the driver’s view. Above horizontal, the
lens shines a continuous arc of light–allowing
improved visibility even when the boat is pitching
in rolling seas.The Articulating Anti-Glare Light
makes it even easier to eliminate glare. The
7.5 patented articulating head adjusts from 15º fore
to 15º aft to fit all base angles and typical deck
installations.

Middle of
Bulb
Articulating Frosted Globe
Articulating Anti-Glare
Overall LED Anti-Glare
Vertical Length
Pole
Length Pole
Length
Deck

Perko ® is a registered trademark of Perko, Inc.
NAVIGATION: ALL-ROUND LIGHT OVERVIEW

LIGHTING 43