Page 698 - 電子目錄全部

Brake caliper file Mechanical torque angle gauge
Extra thin (10 mm wide), especially suited for For screw tightening with a turning angle.
Japanese vehicles. For use between all torque wrenches
1
3
For the removal of stubborn brake dust, dirt, and rust with i drive 12.5 = ⁄ 2” (or 20 = ⁄4”) and tools
in the brake caliper. with j drive 12.5 = ⁄ 2” (or 20 = ⁄4”)
1
3
With flat scraper on the front to remove coarse residue. With flexible magnetic holder for the fulcrum.
Range 0-360°, pitch 1°, 95 mm in dia.

M N Art. No. P. Qty.
r Art. No P. Qty.
155 265 1952 000 669 1
12. = 1/2” 1952 000 057 1
20 = 3/4” 1952 000 710 1

Torque wrench
Brake caliper file
For the removal of stubborn brake dust, dirt, and rust
in the brake caliper.
On vehicles with disk brakes.
File cut: coarse, slanted toothing on one side.
One-sided cut prevents damage to the dust sleeve
on the brake piston.
12 mm wide.
Plastic grip.
Special steel.

Drive ! K Pitch Nm Art. No. P. Qty.

M N Art. No. P. Qty. 20 = 3/4” 400 - 1000 1788 5 1952 000 687 1
165 275 1952 000 664 1 1000 Nm torque wrench
Weight only about 10 kg – ideally suited for industrial
climbers
Use on windmills, on wharves, in heavy industry, and so on.
2-part, demountable (using disengaging tool), in bag –
for carrying it in your hand or on your back
±3% triggering precision from scale value
(in actuation direction)
Triggering force only 590 N (60 kg) at 1000 Nm
Signal head not included.

MWF - 06/08 - 11569 - © •

69