Page 23 - PowerPoint Sunusu

klebstoffe montage technik !

CA-200 INSTANT GLUE

CA Instant Glue
Plastics - Elastomers

Art. - Nr. Contents Packaging
200 000 200 20g 1/10

Special properties : Instructions :
• locks • The surfaces of the workpieces to be bonded
• bonds within seconds must be dry, and free from dust and grease.
• Short time to reach functional strength for assembly • Open time, as well as the necessary pressing
works time, can only be determined accurately by
• Good adhesion characteristics to different surfaces ▪ self-tests because they are strongly influenced
Solvent-free by material characteristics, temperature,
• Good wetting of the substrate applied quantity, air humidity, material humidity,
• Hard adhesive joint ▪ Short fixing times thickness of adhesive film, press power, and
• Good UV-stability ▪ Highly frost- and heat-resisting other criterions. Usually, appropriate safety
factors are considered for the guiding values.
Fields of applications :

• Sewage technique ▪ Sealing technique
• Electrical / electronic industry
• EPDM seals in window, façade, and vitrine construction
• Vehicle / shipbuilding Applicationtemperature +15˚C - +20˚C
• Household appliances production Material moisture % 8-10
• Plastics / elastomer / rubber processing Applied quantity (depending on material)
• Leather / shoe industry Pres time 10 - 15 sek
• Medical / dental technology, orthopaedics Pressure 0,01 -0,8 N/mm²
• Metal construction / technical industrial supplies
• Jewellery industry ▪ Optical goods industry ▪ Toy industry
• Advertising techniques / advertising industry ▪ Exhibition stand construction
Technical Data :

Based Modified cyanoacrylates Technical Data Sheet
color transparent
Open time 30 sek (bei +25 °C, 50 % r. F) MSDS
Viscosity ca.20 mPa.s
Functional hardness PVC/PVC 9 sek (bei +25 °C, 50 % r. F) Our user instructions, processing guidelines, product-
and performance data, and other technical statements
curing ca. 16 h are only general directives; they describe only the
condition of our products (values, determination of
density nach EN 542 bei +20 °C ca. 1,05 g/cm3 values on the date of completion) and the
Heat resistance < 80˚C performances do not represent a warranty.