Page 12 - Prosig Catalogue 2005
P. 12
HARDWARE PRODUCTS USB IEPE Bridge Charge CAN DAC Up to
2.0
bus
input
1024
AC
DATA ACQUISITION SYSTEMS 24 DC Tacho TEDS o C o F channels
or
bit
input
P8048 - High Channel Count System
Training & Support Split rate sampling Multiple sampling rates can run
System
Analog inputs 48 to 1024 channels plus tachos
Expansion Flexible packaging options
concurrently in separate cards
Programmability All features under software
Communications USB 2.0
Environmental control
Shock and vibration Suitable for mobile use (5g rms)
Condition Monitoring • High channel count Supply voltage Choice of 10-36V DC (e.g.
Operating temperature 0 C to +40 C (32 F to +104 F)
o
o
o
o
Humidity 80% RH, non-condensing
Weight Dependent on configuration,
channel count & chassis
General
vehicle battery) or AC mains
• 12 card chassis
(adapter supplied)
• Standalone or rack mount
(H x W x D) (7.3” x 17.7” x 15.7”)
• 24-bit precision Dimensions † 185mm x 450mm x 400mm
† Dimensions are measured exclusive of any handles or other attachments
• Up to 100k samples/sec/channel (24bit)
• Up to 400k samples/sec/channel (16bit) The P8048 is the high channel count version of the Prosig
Software • Up to 1024 channels P8000 24-bit data acquisition system. It has all the same signal
• Configurable channel options
conditioning as the P8012/P8020. It can also be configured with
all the same cards (see pages 13 - 15)
PROLOG - Standalone/Remote Controller
Prolog is a controller that can replace your laptop or PC to allow
remote, unattended or standalone operation of a P8000 system.
Hardware Prolog can also be used to operate your P8000 hardware from a
The system may include one or more P8000 chassis.
remote location using a PC or laptop. It has a Gigabit Ethernet
port that allows the P8000 hardware to be controlled over a
LAN, WAN or VPN. The P8000 acquisition software can control
a P8000 system over USB or over Ethernet with the help of the
Prolog unit without any loss of functionality. The unit can be
powered from a 10 - 36V DC supply (e.g. vehicle battery) or the
• Operate your P8000 without a laptop supplied AC mains adapter.
System Packages • Allows standalone and unattended operation the P8000 system configuration is complete the setup can be
The initial setup for standalone mode is performed with the
• Remote operation of P8000 via Ethernet
standard Prosig acquisition software using a laptop or PC. Once
“locked” into the Prolog unit and the PC disconnected. The
• Up to 256GB solid state memory
Prolog controller then takes over. Buttons on the unit are used
• Data stored internally (accessible via Ethernet)
to Arm, Start, Stop and Clear the P8000 hardware. Status lights
show Overrange Detection, System Loaded, System Armed and
• Or on removable external USB storage
System Acquiring and Error conditions. Data is captured either
to internal storage that can be accessed via Ethernet or to
external, removable USB storage.
12 http://prosig.com +1 248 443 2470 (USA) or contact your
+44 (0)1329 239925 (UK) local representative
sales@prosig.com
A CMG Company
