Page 5 - FQ10520.EnerjCombustion.Quebec.Canada.DC 5600S w1800 Gal Tank & Options

Page No. 4
Proposal No. Q10520
Date: June 14, 2017

One (1) Set of Pump Controls Including:

1. Starter with NEMA Type 1 of enclosure and overloads mounted on heater.
2. Selector switch, mounted on the panel or starter.
3. Starter coil and selector switch are prewired.
4. Pressure gauge.
5. Check valve.

One (1) Water Level Control Sensor Assembly Including:

1. Four (4) level sensing probes.
2. One (1) set of gauge cocks with plastic sight glass.
3. Water wall level sensor.

One (1) Water Flow Rate Assembly Including:

1. One (1) pressure gauge. (Setting rate).
2. One (1) pressure actuated switch. (Confirm flow and initiate firing).

One (1) Water Make-Up Valve Including:

1. Average rate solenoid operated valve.
1.1 Anti-hammer diaphragm seat.

One (1) Outer Wall Temperature Sensor.

One (1) Water Recirculation Assembly Including:

1. Temperature actuated switch - electronic signaling type.
2. Recirculation water valve - solenoid operated.
2.1 Anti-hammer diaphragm seat.

NOTE: Water Control Valves shall be prepiped and prewired on the water heater system.
The system shall be prepiped with T-304 stainless steel pipe, flanges and fittings.