Page 7 - FQ10520.EnerjCombustion.Quebec.Canada.DC 5600S w1800 Gal Tank & Options

Page No. 6
Proposal No. Q10520
Date: June 14, 2017
Note II - Certified Inspection

All Ludell Direct Contact Water Heaters are factory inspected.

Note III - Customer to Provide

A. Constant minimum gas pressure to the entrance of the gas train of: 1 PSIG
@ 5,600 FT /HR.
3

B. Constant water pressure to the entrance of the water heater of: 30 PSIG
minimum at 150 GPM

B.1 Ludell can furnish a booster pump with necessary controls at added
cost, if required to obtain 30 PSIG minimum constant water
pressure.

C. Disconnect switches and reattachment of electrical wiring and piping
subassemblies. Note: The heating system is completely prewired and
prepiped, however it must be disassembled in subassemblies to prevent
damage in shipment.

D. Electrical/Mechanical utility service to the heater.

D.1 Power *575 Volts, 3 Phase, 60 Hertz to blower and pump. *To be
verified by customer.
D.2 Control 115 Volts, 1 Phase, 60 Hertz to heater and burner control
panel.

E. Piping from the heater overflow to a drain.

F. Installation and hook-up of equipment prior to visit from Ludell Field
Engineer.

G. Local permits and approval, if applicable. Note: May require Provincial
approval, which is customer’s responsibility. Ludell will assist in
providing all necessary documentation to procure possible permits or
approvals at no additional cost to the customer.

Note IV - Optional Offer (Available Upon Request)

A. Ludell offers dual gas trains for use with either propane or natural gas. In
addition, various types of gas trains are available, which meet GE GAP
(formerly IRI), AGA, and FM specifications.

B. Spare parts kit.