Page 2 - Listado de precios Pertici-2019/2020

MC700A
CNC Vertical Machining centre on 5 axes

for drilling, milling and copying operations suitable for: aluminium profiles, steel profile with a thickness up-
to 3 mm , pvc profiles (including steel reinforced pvc profiles up-to 3 mm), various plastic materials.
The presence of n. 2 rotating tables indipendently controlled by CNC (one in the right side and the other one
in the left side), each one supporting n. 4 indipendent automatic clamps, allows to work at any angle
between +90° and -90°.
The rotating tables will be syncronized when 7000mm profile will be machined.
The clamps move simultaneously in positions calculated by CN, in order to avoid collision with the
operationg head.

Main Technical Data
Working length: 7000 mm
Working Width: 200 mm
Working Height: 200 mm

Tool Change: automatic
Tool Change Estimated Time: 12 – 16 seconds X Axis Drive: Brushless motor, hardened and grounded ball
bearing rails, high precision helical teeth rack, maximum speed of 90 etres/minute
Y Axis Drive: Brushless motor, hardened and grounded ball bearing rails, recirculating ballscrew, maximum
speed of 60 metres/minute
Z Axis Drive: Brushless motor with brake, hardened and ground ball bearing rails, recirculating ballscrew,
maximum speed of 60 metres/minute

Rotating Table Drive: Brushless motor, high stiffness support, with high precision roller bearings, zero
backlash reducer, maximum speed of 90° per second, zero backlash reducer, maximum speed of 120° per
second.
Axis Escape Security: Electrical, Software and Mechanical limit switch securities
Axis Positioning Control: with rotating trasducers
Operating System: WIndows 7 Professional
Axis Management: Numerical Control with features of PLC
Accuracy: ripetition on linear position +/-0.1 mm
• Pendulum working enables the operator to divide the machine into two well distinct machining areas:the
operator can access one of the two areas for changing the workpiece, while in the second area the
machine keeps working; in this way it's possible to perform different machining processes in the two
distinct areas.
An intermediate area is protected in order to assure the safety of the operator when the machine is
used in this mode.
The machining area is 3500 mm (left) and 3500 mm (right)
This system increases and optimizes the productivity because it eliminates the idle times caused by the
machine downtime and it gives the possibility to perform different machining processes in the two
separated areas.
• 8 positions tools magazine on board X axis;
• n. 2 Movable "X" stops for each working area;
• Safety system composed by Full Enclosure;
• Revolving keyboard, colour LCD monitor and mouse
• Electric spindle HSK F63 7,5KW, 10Hp, 24000 rpm.
• Minimal Cooling lubricant unit with 2 sparying nozzles

- 2 - This Price List cancels and replaces the previuos one