Page 103 - MUD-catalog-2019_Neat

AF 103

Balancing Lift Bars and Buttons

MUD Balancing Lift Bars are designed with a slide-and-lock INSTALLING THE LIFTING BAR: Three holes (A, B and C)
attachment for fast positioning at the balance points of have been drilled and tapped in the lifting bar to accept an
insert molds and standard mold bases. These bars fit over eye bolt (D). These holes allow positioning the eye bolt at
inexpensive buttons mounted on the mold in place of eye either the center (B) or off-center (A or C) of the balancing
bolts. This combination allows insert molds as well as lift bar. This position is based on the approximate weight of
standard mold bases to be easily lowered in and raised the mold.
out of the molding machine. These bars are available in
capacities to 5,140 pounds. The final positioning of the lifting bar is determined by sliding
NOTE: Specifications subject to change without prior notice. the lifting bar over the mold’s lifting buttons until the exact
balance point is established. A line is then scribed on the
mold to identify this stop-point location. The A, B or C position
Lifting Bar Buttons
ITEM for the eye bolt should also be noted.
NO. E F G H
LB2-37 0.750 1.00 1.00 3/8-16 Balancing Lift Bar
LB2-50 0.750 1.00 1.00 1/2-13
LB6-50 1.000 1.37 1.12 1/2-13 ITEM Max. A B C D
NO.
Lift
LB6-62 1.000 1.37 1.12 5/8-11 LB-2 1720# 4.00 1.75 1.75 1/2-13
LB12-62 1.370 1.87 1.75 5/8-11 LB6 3320# 6.00 2.62 2.12 3/4-10
LB12-75 1.370 1.87 1.75 3/4-10 LB12 5140# 10.00 3.25 3.38 1 1/4-7
LB12-10 1.370 1.87 1.75 1.00-8

A MUD Quick-Change Adapter Frame Systems for Standard Mold Bases | Lift Bars & Buttons

B
Lifting Bar Lifting Button
A B C
G

D
H
E
C
F

U.S. PATENT #5,033,784

U.S. 800-626-6653 n www.dme.net

Canada 800-387-6600 n Mexico 52-442-713-5666