Page 38 - Hot Runner & Control Systems 2020

26 Hot One Nozzles
36
375 Series High Performance Nozzles

(.375 Diameter Flow Channel)

375 Series Nozzle Sub-Assembly
SQUARE COIL HEATER
REAR LOAD
(SCH0XXX) (Add .750 to A dimension for extended sprue gate and extended full body point gate tips.)
Ø2.000 3 1
A B SUB-ASSEMBLY 1 2 3
ITEM NUMBER NOZZLE BODY HEATER SEAL RING
1.000 — EHA0008 SCH0088
1.250 EHA1008 SCH1088
2.000 CIB1366
2 — CIA0008S CIH0088S
A 1.250 CIA1008S CIH1088S
— EHA0009 SCH0089
5/8-20 UN 1.250 EHA1009 SCH1089
2.500 CIB1367
Hot One Nozzles | 375 Series High Performance Nozzles (.375 Diameter Flow Channel)
Ø0.375 — CIA0009S CIH0089S
1.250 CIA1009S CIH1089S
SQUARE COIL HEATER — EHA0010 SCH0090
FRONT LOAD
(SCH1XXX) 1.250 EHA1010 SCH1090
3.000 CIB1368
3 1 — CIA0010S CIH0090S
1.250 CIA1010S CIH1090S
— EHA0011 SCH0091
B 1.250 EHA1011 SCH1091
3.500 CIB1369
— CIA0011S CIH0091S
Custom Hot Runner Systems | Index
1.250 CIA1011S CIH1091S
2 — EHA0012 SCH0092 EHR7155
1.250 EHA1012 SCH1092
4.000 CIB1370
— CIA0012S CIH0092S
HIGH PERFORMANCE HEATER 1.250 CIA1012S CIH1092S
REAR LOAD
(CIH0XXX-S) — EHA0013 SCH0093
3 1 1.250 EHA1013 SCH1093
5.000 CIB1371
— CIA0013S CIH0093S
1.250 CIA1013S CIH1093S
— EHA0014 SCH0094
1.250 EHA1014 SCH1094
6.000 CIB1372
2 — CIA0014S CIH0094S
1.250 CIA1014S CIH1094S
— EHA0015 SCH0095
1.250 EHA1015 SCH1095
HIGH PERFORMANCE HEATER 7.000 CIB1373
FRONT LOAD — CIA0015S CIH0095S
(CIH1XXX-S) 1.250 CIA1015S CIH1095S
3 1

B WIRING INFORMATION:
Power leads are tan
Ground leads are green
Thermocouple leads are black and white
2
n White is negative (-) and constantan (non-magnetic)
n Black is positive (+) and iron (magnetic)

.68
Replacement Seal Rings .06
ITEM NUMBER
Used between manifold and nozzle to prevent leakage. New seal EHR7155
rings must be installed each time manifold is assembled.
U.S. 800-626-6653  Canada 800-387-6600  dme@milacron.com  www.dme.net