Page 36 - A guide to dosage form 1_full v3

PAEDIATRIC DOSES

The dose for each medication are usually determined for adults and undeniably, paediatric will require
a smaller dose as compared to the adults. Ideally, this should also be determined through clinical
research studies but this is not always possible.

Hence, methods were developed on how to calculate the dosage in the most accurate
manner. For some drugs that have a narrow therapeutic window (narrow range between desired
therapeutic efficacy and severe toxicity) such as anticancer drugs, dosage calculation should be done
very carefully.

Usually, doses are calculated by using either the body weight or the body surface area. If the
body weight is to use, the dose will usually be expressed in mg/kg. Example;

The dose of paracetamol is 15 mg/kg/dose, three times a day
The child’s weight is 10 kg

Thus, the dose for the child will be = 15 mg x 10 kg

= 150 mg for each dose, three times a day

If the dose in mg/kg is not available, Clark’s Rule can be used to calculate the children dose
from a known adult dose.

Clark’s Rule

ℎ ℎ ℎ
Paediatric dose =
75
_________________________________________________________________________________

The second method of calculation is by using the body surface area. This is a more accurate
method and is used especially when extreme accuracy is needed.

Dose calculation based on body surface area

Body surface area (m2) = Weight (kg) 0.425 x Height (cm) 0.725 x 0.007184

( ) ℎ ℎ ( 2)
Paediatric dose =
1.73 2
* 1.73 m2 is the body surface area of an average adult

________________________________________________________________________

Apart from these two calculation methods, paediatric doses can also be calculated based on
a child’s age by using the formulas below:
Fried’s Rule for Infants

( ℎ)
Paediatric dose =
150

32