Page 125 - Parker - Hydraulic and Lube Filtration Products

MPD Series

Specifi cations

ANSI Dimensional Drawing

8.00 ± .12 4.00 ± .03 ø .75 ± .03 ( ø 19.1 ± .8)
(203.2 ± 3.0) (101.6 ± .8) Mounting Holes
2 places 2 places 6 places
4.91 ± .12
ø 6.40 ± .06 (124.7 ± 3.0)
( ø 162.6 ± 1.5)
2 places
3.25 ± .12
(82.6 ± 3.01) 5.00 ± .03
2 places (127.0 ± .8)
2 places
ON-DUTY ROTATE PULL TO Cover Torque
60-70 FT-LBS
PULL TO ROTATE 2.50 ± .03
ON-DUTY (81.4-94.9 Nm)
(63.5 ± .8)
2 places
1. OPEN EQUALIZING VALVE TO BALANCE PRESSURE.
DIRECTIONA
3. PULL DETENT RING TO ALLOW HANDLE ROTATION.
FILTER CHANGE OVER PROCEDURE (726.9 ± 6.4)
2. SHIFT DIRECTIONAL LEVER ON RATCHET HANDLE.
INLET UNIT FULLY SHIFTED/DETENT ENGAGES.
28.62 ± .25
1.62 Nominal 4. ROTATE RATCHET HANDLE BACK & FORTH OVER 2.56 ± .03 (MPD-2)
(65.0 ± .8)
cover hex 2 places
2 places
R7.00 ± .25 (R177.8 ± 6.4)
22.40 ± .50 (569.0 ± 12.7)
¼“ SAE-4 SAE Equalizing
O-Ring Boss Valve
Pressure Ports
Per SAE J1926/1
-2 PLS Plugged
Torque
Linear Measure: inch [millimeter] 10-15 FT - LBS
(13.6 - 20.3 Nm) IN
7.00 ± .03
(177.8 ± .8)
5/16” SAE - 5 O-Ring Boss
Vent Plug, Port Per SAE J1926/1 .28 ± .06
Torque 15-20 FT - LBS (20.3 - 27.1 Nm) (7.1 ± 1.5)
Ratchet - 2 Places OUT
Handle
Handle
Detent
4.00 ± .03
(101.6 ± .8)
LIFT RING AND ROTATE HANDLE OVER INLET FOR CHANGEOVER

1“ SAE-16 Drain Port
2 Places Plugged
Torque 60-70 FT - LBS
(81.4 - 94.9 Nm)
IN Optional Chamber
Mounted Differential
Pressure Indicator
(Type M2
Indicator shown
19.18 ± .18 Torque 25-30 FT-LBS
(487.2 ± 4.6) (33.9-40.7 NM)
(MPD-1)
OUT

.69 ± .09 2“ Raised Face 300 LB. 10.25 ± .03
(17.5 ± 2.3) Foot Mounting InLet/Outlet Flange (260.4 ± .8)
Surface Per ANSI B16.5 2 Places
Drawings are for reference only.
Contact factory for current version.

120