Page 356 - Parker Parflex Thermoplastic & Fluoropolymer Products Hose, Tubing, & Fittings 2017 - Cat 4460

Hose Pressure Rating of Hose End Connections
A

The maximum dynamic working pressure of the hose assembly is the lesser of the rated working
pressure of the hose and the end connections used.

PRESSURE RATINGS HOSE ASSEMBLIES - psi (MPa) PRESSURE OF THE HOSE AND THE END CONNECTIONS USED
Hose End Part Inch Fittings
Tubing Connection Number
B Description Codes -2 -4 -5 -6 -8 -10 -12 -16 -20 -24 -32 -40 -48 -64
psi psi psi psi psi psi psi psi psi psi psi psi psi psi
(MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa)
12,000 12,000 10,000 10,000 7,500 6,500 5,000 3,000 2,500
Male Pipe (NPTF) 01
(82.7) (82.7) (68.9) (68.9) (51.7) (44.8) (34.5) (20.7) (17.2)
Female Pipe 02 & 07 7,500 7,000 6,000 5,000 4,000 3,000 2,500 2,000 2,000
(41.4)
(17.2)
(48.3)
(NPTF, NPSM)
(27.6)
(51.7)
(20.7)
(34.5)
13.8)
13.8)
Coiled Air Hose & Fittings Male Pipe (BSP) 91 & D9 5,000 9,000 8,000 6,250 5,500 5,000 4,000 3,500 3,000 3,000
(27.6)
43.1)
(20.7)
(24.1)
(20.7)
(34.5)
(34.5)
(55.2)
(62.1)
4,000
6,250
3,000
5,000
9,000
5,000
3,000
8,000
3,500
92, B1, B2 & B4
Female Pipe (BSP)
(55.2)
(34.5)
(62.1)
(24.1)
43.1)
(27.6)
(20.7)
(20.7)
(34.5)
(37.9)
C Female Pipe (JIS) FU, GU, MU & UT 5,000 5,000 5,000 4,000 3,000 2,500 1,500 1,500
(34.5)
(20.7)
(34.5)
(17.2)
(10.3)
(10.3)
(27.6)
(34.5)
O-Ring Swivel and 13, 1L, S2, 0G, 0L, 48, 3,000 3,000 3,000 3,000 2,750 2,250 2,000 1,625 1,250 1,125
45° Flare 08, 77 & 79 (20.7) (20.7) (20.7) (20.7) (19.0) (15.5) 13.8) (11.2) (8.6) (7.8)
37° Flare and Straight 03, 05, 06, 37, 39, 41, 6,000 6,000 5,000 5,000 5,000 5,000 4,000 3,000 2,500 2,500
Thread L7 & L9 (41.4) (41.4) (34.5) (34.5) (34.5) (34.5) (27.6) (20.7) (17.2) (17.2)
Flare 04
6,000 6,000 5,600 5,600 4,200 4,200 3,500 3,500 3,000 3,000
11 & 12
SAE Flareless
Transportation SAE Inverted Flare 28, 67 & 69 2,750 2,500 2,250 2,000 6,000 6,000 6,000 4,000 4,000
(20.7)
(20.7)
(24.1)
(38.6)
(29.0)
(29.0)
(38.6)
(24.1)
(41.4)
(41.4)
(19.0)
(15.5)
(17.2)
13.8)
Seal-Lok® (O-Ring Face
JM, JC, JS, J0, J1, J5,
6,000
6,000
6,000
D Seal) J7 & J9 (41.4) 6,000 (41.4) (41.4) (41.4) (41.4) (41.4) (27.6) (27.6) 3,000
5,600
6,000
4,200
3,000
4,200
3,500
5,600
3,500
A-Lok® TU, AL (41.4) (41.4) (38.6) (38.6) (29.0) (29.0) (24.1) (24.1) (20.7) (20.7)
2,000 1,500
Rapid Assembly WU, WY, WW
(13.8) (10.3)
Hose End Part
Fittings Connection Number Metric Fittings
E Description Codes -6 -8 -10 -12 -14 -15 -16 -18 -20 -22 -25 -28 -30 -35 -38 -42
psi psi psi psi psi psi psi psi psi psi psi psi psi psi psi psi
(MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa) (MPa)
DIN Light “L” C3, C4, C5 & 1D 3,500 3,500 3,500 3,500 3,500 2,250 2,250 1,400 1,400 1,400
without O-Ring (24.1) (24.1) (24.1) (24.1) (24.1) (15.5) (15.5) (9.7) (9.7) (9.7)
DIN Light “L” with D0, CA, CE & CF 4,500 4,500 4,500 4,500 4,500 2,250 2,250 2,250 2,250 2,250
(31.0)
(31.0)
(15.5)
(31.0)
(15.5)
O-Ring
(15.5)
(15.5)
(31.0)
(31.0)
(15.5)
Tooling, Equipment & Accessories DIN Heavy “S” C6, C7, C8 & 3D 9,000 9,000 9,000 9,000 5,750 5,750 5,750 3,500 3,500
(39.6)
without O-Ring
(24.1)
(62.1)
(62.1)
(62.1)
(39.6)
(24.1)
(39.6)
(62.1)
6,000
DIN Heavy “S” with
6,000
9,000
4,500
9,000
9,000
6,000
9,000
6,000
C9, 0C, 1C & D2
(31.0)
(41.4)
(41.4)
62.1)
(62.1)
62.1)
(41.4)
62.1)
O-Ring
(41.4)
F NOTE: All the above ratings are based on low carbon steel hose fittings.
PRESSURE RATING OF HOSE - psi (MPa)
General Technical
THE MAXIMUM WORKING PRESSURES OF HOSES ARE LISTED ON PAGE A-10 : A-17 WITH EACH HOSE DESCRIPTION IN SECTION A.
G For detailed ordering information, please consult price list or contact Parflex Division.
G-10 Parker Hannifin Corporation | Parflex Division | Ravenna, Ohio | parker.com/pfd