Page 87 - Parker Parflex Thermoplastic & Fluoropolymer Products Hose, Tubing, & Fittings 2017 - Cat 4460

SLH – Sewer Leader Hose A Hose

Features

ƒ Easily identified black cover indicates termination
of hose

Certifications Tubing

ƒ NSWMA (National Solid Waste Management Assoc.) B
ƒ WASTEC (Waste Equipment Technology Assoc.)
ƒ WEMI (Waste Equipment Management Inst.)

Applications/Markets
Coiled Air Hose

ƒ Leader hose for S5N/S6/S9 high-pressure sewer cleaning hose & Fittings
C

Maximum Minimum Permanent
Part Nominal Maximum
Number I.D. O.D. Working Bend Weight Fitting
Pressure Radius Series

lbs
inch mm inch mm psi MPa inch mm lbs./ft. kg./mtr. Transportation
SLH-8 1/2 13 0.77 20 4,000 27.6 3.50 89 .25 .37 HY
SLH-12 3/4 19 1.08 27 3,000 20.7 4.80 122 .45 .67 HY D
SLH-16 1 25 1.43 36 3,000 20.7 6.00 152 .80 1.19 HY

Construction Color
Tube: Gray Copolyester Black
Reinforcement: Wire Notes
Cover: Smooth synthetic rubber Fittings
• Not for use in hydraulic applications
Operating Parameters • Non-perforated cover E
Temperature Range:
• -40°F (-40°C) to +135°F (57°C)
Vacuum Rating: 28 inch Hg
Change in length at Max. Working Pressure: +/-2%
Min. Burst Pressure is 2.5x Max. Working Pressure at 73°F (23°C)
Fittings Tooling, Equipment
HY Series – Available from Parker Hose Products Division & Accessories
For most Parker products, Crimp Die Selection charts can
be found online at www.parker.com/crimpsource F
Access instructions are on pg. G-14

General Technical

For detailed ordering information, please consult price list or contact Parflex Division. G
Parker Hannifin Corporation | Parflex Division | Ravenna, Ohio | parker.com/pfd A-61