Page 5 - Linde - VT Modular, Modular system for LSC manifold valve plates

Model Code Build.

00XXC0 SPD EH 023 0ABCD 00XXC0 00XXC0 023 0ABCD 00XXC0 00XXC0

17,18 19 20 21 22 23,24 25,26 27 28 29,30 31,32

19 Expansion Block Type, Position 1 23,24 A Port Valve and Setting, 28 Valve Type, Position 1, Bottom
S - Single Station, no bottom porting Position 1 Top 0 - No Valve (Blanking Plate)
P - Single Station, P port on bottom 0,0 - No port relief or anti-cav check (plug- A - Asymmetrical Metering Spool, A and B
D - Double Station, porting for second valve ged cavity) blocked in neutral
on bottom X,X - Port relief setting (in ten bar incre- B - Symmetrical Metering Spool, A and B
Note: If additional expansion blocks are required, ments) (90 bar to 400 bar) (380 bar stan- blocked in neutral
repeat positions 19 through 32. A total of three dard) C - Symmetrical Metering Spool, A and B
expansion blocks may be used. open to Tank in neutral
C,0 - Anti-cav Check (2 bar cracking pres- D - Symmetrical Metering Spool with straight

20 Valve Actuation Type, Position 1 sure) tracking feature (25 size only)
E - 24 volt proportional, Integral Deutsch 25,26 B Port Valve and Setting,
male connector (standard) Position 1 Top 29,30 A Port Valve and Setting,
H - Hydraulically piloted, 6-19 bar (standard) Position 1 Bottom
0,0 - No port relief or anti-cav check (plug- 0 - No port relief or anti-cav check (plugged
ged cavity)
21 Valve Size, Position 1, Top cavity)
X,X - Port relief setting (in ten bar incre-
0 - No Valve (Blanking Plate) X,X - Port relief setting (in ten bar incre-
ments) (90 bar to 400 bar) (380 bar stan-
2 - 25 size valve dard) ments) (90 bar to 400 bar) (380 bar stan-
3 - 30 size valve C,0 - Anti-cav Check (2 bar cracking dard)
pressure) C,0 - Anti-cav Check (2 bar cracking pres-
22 Valve Type, Position 1, Top Note: If position 19 = S or P, sure)
0 - No Valve (Blanking Plate) omit position codes 27 through 32
31,32 B Port Valve and Setting,
A - Asymmetrical Metering Spool, A and B Position 1 Bottom
blocked in neutral 27 Valve Size, Position 1, Bottom 0,0 - No port relief or anti-cav check (plug-
0 - No Valve (Blanking Plate)
B - Symmetrical Metering Spool, A and B ged cavity)
blocked in neutral 2 - 25 size valve
3 - 30 size valve X,X - Port relief setting (in ten bar incre-
C - Symmetrical Metering Spool, A and B ments) (90 bar to 400 bar) (380 bar stan-
open to Tank in neutral dard)
D - Symmetrical Metering Spool with straight C,0 - Anti-cav Check (2 bar cracking pres-
tracking feature (25 size only) sure)
Note: If position 4 = 1,
omit position codes 33 through 60

5