Page 208 - Wagp_InterfaceElectronic_Volume4_2015_US.pdf

857-800

3 JUMPFLEX Signal Conditioners
®
206 Temperature Signal Conditioner for Pt 00, Pt200, Pt500 and Pt1000 as well as Resistors 0 ... 1 kΩ; 0 ... 4.5 kΩ

Configuration via:

DIP switch

<_________ 96 mm/3.76 in _________> 1 IN OUT 5 OUT+

6 GND 1
2

8 GND 2
4
_> 3 POWER 7 Us+
____________
_>
6 mm/0.23 in
<_________ 94 mm/3.68 in _________>
Short description: Pack.
The 857-800 Temperature Signal Conditioner records Pt100, Pt200, Pt500 and Pt1000 Description Item No. Unit
sensors, as well as resistors up to 4.5 kOhm, converting the temperature signal into a
®
standard analog signal on the output side. JUMPFLEX Signal Conditioner, for DIN 35 857-800 1
Temperature Signal Conditioner for Pt 100, Pt 200, Pt 500 and
Characteristics:
• For Pt100, Pt200, Pt500 and Pt1000 sensors, as well as resistors up to 4.5 kOhm Pt 1000 as well as Resistors 0 ... 1 kΩ; 0 ... 4.5 kΩ
• 2-, 3-, and 4-wire connection technology
• Calibrated scale switching
• Sensor's wire break/short circuit
• Measuring range underflow/overflow
• Clipping capability allows analog standard signal limitation to upper range values
• Safe 3-way isolation with 2.5kV test voltage to EN 61140
Technical Data Technical Data
Configuration: Environmental requirements:
Configuration DIP switch Ambient operating temperature -25 °C ... +70 °C
Input: Storage temperature -40 °C ... +85 °C
Input signal PT sensors and resistors Safety and protection:
Sensor types Pt100, Pt200, Pt500, Pt1000 Test voltage (input/output/supply) 2.5 kV AC, 50 Hz, 1 min
Sensor connection 2-wire, 3-wire, 4-wire (switchable) Connection and type of mounting:
®
Temperature range -200 °C ... +850 °C Wire connection CAGE CLAMP S
Sensorspeisestrom < 0.5 mA Cross sections solid:
Resistor input 0 ... 1 kΩ , 0 ... 4.5 kΩ 0.08 mm² ... 2.5 mm² / AWG 28 ... 14
Output: fine-stranded:
Output signal 0 ... 20 mA, 4 ... 20 mA, 0.34 mm² ... 2.5 mm² / AWG 22 ... 14
0 ... 10 V, 2 ... 10 V, Strip lengths 9 ... 10 mm / 0.37 in
0... 5 V, 1 ... 5 V, Dimensions and weight:
0 ... 10 mA, 2 ... 10 mA Dimensions (mm) W x H x L 6 x 96 x 94
Load impedance ≤ 600 Ω (Out = mA) Height from upper-edge of DIN 35 rail
≥ 2 kΩ (Out = V) Weight 42 g
Step response 180 ms (360 ms at 3-wire) Standards and approvals:
General specifications: Conformity marking 1
24V DC r UL 508
Nominal supply voltage V S
Supply voltage range 16.8 V ... 31.2 V r ANSI/ISA 12.12.01 Class I, Div. 2, Grp. ABCD, T4
Current consumption at 24 V DC < 40 mA Shipbuilding g
Min. measuring span 50 K (50 Ω) Accessories see pages 226 … 236
Transmission error ≤ 0.1 % at max. measuring span
Transmission error of set
measuring span ((10 K / set measuring span [K]) + 0.1) %
Temperature coefficient ≤ 0.02 % /K