Page 99 - Wagp_InterfaceElectronic_Volume4_2015_US.pdf

1

97
Multirange timing relay, on-delay
4 selectable time ranges
4 voltage ranges 1
1 changeover contact
Module width 25 mm / 0.984 in

Zeitbereich 03-3s 3-12s 10-100s 100-800s Schalter
Schalter- OFF ON ON OFF 1
stellung ON OFF ON OFF 2

220 V ~ Zeiteinstellung* Zeitbereich**
1 2
110 V ~ off
24 V ~
24 V – on
0 V

* with trimming potentiometer; ** DIL switch

Within these time ranges, time adjustment can be mode with the AC
220V
timming potentiometer. 12
AC
WSB marker cards 110V 11
• Marking K; Item No.: 209-782 AC
24V 11
• Marking 1 ... 10; Item No.: 209-702
• Marking U1, U2, U3, U4, 0V, 12, 11, 11, 14, 14; DC 14
24V
Item No.: 209-951
0V 14
5 cards, each containing 10 strips with 10 markers
Description Item No. Pack.
Unit
Multirange timing relay module; on-delay, 286-616 1
4 voltage ranges
230 V AC, 115 V AC, 24 V
AC, 24 V DC;
0.3 s ... 3 s, 3 s ... 12 s, 10 s ... 100 s, 100 s ... 800 s
Time ranges selectable with DIL switch
Technical Data Accessories see pages 99 … 100

Nominal input voltage (V N ) 230 V AC, 115 V AC, 24 V AC, 24 V DC 8
Current input at rated voltage (coil 20 °C) 30,4 mA, 32,6 mA, 20,2 mA, 17,5 mA
Contact material AgNi
Max. switching voltage 240 V AC
Max. make current 5 A
Max. continuous current 5 A
Max. switching power (resistive) 1200 VA
Pull-in/drop-out/bounce time typ. 0ms / 15ms / 3 ms
Reset time 100 ms
Repeat accuracy ±0.5 %
Dielectric strength contact-coil (AC, 1 min) 2 kV
Nominal voltage acc. to VDE 0110 Part 1/4.97, 250 V / 4 kV / 2
IEC 60664-1
7
Mechanical life 2 x 10 switching operations
5
Mechanical life at max. load (resistance) 1 x 10 switching operations
Ambient operating temperature -25 °C ... +40 °C
Dimensions (mm) L x H x W incl. terminal block 25 x 82.5 x 50

Accessories Item No. Pack. Item No. Pack.
Unit Unit
Terminal block for pluggable modules, with 2-
conductor terminal blocks, orange separator ➊ 27 mm / 1.063 in wide 280-639 1
with 4-conductor terminal blocks, orange separator ➋ 27 mm / 1.063 in wide 280-629 1
with 4-conductor terminal blocks, marker plate ➋ 30 mm / 1.181 in wide 280-765 1
wire range 0.08 mm² ... 2.5 mm² / AWG 28 ... 14;
stripped length 8 ... 9 mm / 0.33 in