Page 389 - Wago_PCB_TerminalBlocksConnectors_Volume2_2015_US

!

2-Conductor Female Connectors
MCS MIDI Classic 6
387

With locking levers
Pin spacing: 5 mm / 0.197 in. Pin spacing: 5 mm / 0.197 in. Handling

0.2–2.5 mm 2 24–12 AWG 0.2–2.5 mm 2 24–12 AWG
320 V/4 kV/2 16 A 300 V/20 A 320 V/4 kV/2 16 A 300 V/20 A

<___ 26,45___>
<
10 ,6
> <_20,8__ > _

4,75 <___ <____ 29,8 ____> <___ 26,45 ___> < 2,85 ____
4,75
<
> 5•
___>
5• ____> 5,25 <_____ L ____> <___ <__20,8__> <
> 8,55 > 8 < 6
< <____L _
5,25 ___>
L = (pole no. – 2) x pin spacing + 10 mm Operating CAGE CLAMP S is easy, fast and identical
®
to that of CAGE CLAMP .
®
The screwdriver is fully inserted into the operating slot,
holding the CAGE CLAMP S open. After the conductor
®
Pole No. Item No. Pack. Unit Pole No. Item No. Pack. Unit has been inserted into the clamping unit and the screw-
2-conductor female connector, 2-conductor female connector with locking levers, driver been withdrawn, the conductor is clamped safely.
Solid and fine-stranded conductors < 0.5 mm (20 AWG)
2
gray gray are also connected and removed using a screwdriver.
2 231-2102/026-000 100 2 231-2102/037-000 100
3 231-2103/026-000 100 3 231-2103/037-000 50
4 231-2104/026-000 100 4 231-2104/037-000 50
5 231-2105/026-000 50 5 231-2105/037-000 50
6 231-2106/026-000 50 6 231-2106/037-000 50
7 231-2107/026-000 50 7 231-2107/037-000 50
8 231-2108/026-000 50 8 231-2108/037-000 25
9 231-2109/026-000 50 9 231-2109/037-000 25
10 231-2110/026-000 50 10 231-2110/037-000 25
11 231-2111/026-000 25 11 231-2111/037-000 25
12 231-2112/026-000 25 12 231-2112/037-000 25
13 231-2113/026-000 25 13 231-2113/037-000 25
14 231-2114/026-000 25 14 231-2114/037-000 25
15 231-2115/026-000 25 15 231-2115/037-000 25
16 231-2116/026-000 25 16 231-2116/037-000 10
Solid conductors ≥ 0.5 mm (20 AWG), as well as
2
ferruled, fine-stranded conductors can be terminated by
2- to 3-pole female connectors – one latch only simply pushing them in. Touch contacting is
possible by inserting test probes into the test slots.
Group arrangement without loss of pin spacing
Combining WAGO MCS multipole female connectors
into a single, long male header is a common customer
requirement. This is made possible by using modular
female connectors with integrated end plate, offering the
possibility of side-by-side stacking without needing an
unused pole between connectors for spacing.
Female connectors with built-in end plate require no
extra space, while maintaining the nominal cross-section.
This means: Total length of female connectors is reduced
to “pole no. x” pin spacing!