Page 328 - Wago_Rail-MountedTerminalBlockSystems_Volume1_2015_US.pdf

"

X-COM -SYSTEM
®
6 1-Conductor/1-Pin Carrier Terminal Blocks and Carrier
326 Terminal Blocks for Pluggable Modules (Fuses, Relays, Optocouplers, etc.)
0.08 - 4 mm² AWG 28 - 12 0.08 - 4 mm² AWG 28 - 12
400 V/6 kV/3 1 600 V, 20 AU 400 V/6 kV/3 1 300 V, 20 AU
I N 16 A 2 300 V, 20 A2 I N 16 A 2 300 V, 20 A2
Terminal block width 5 mm / 0.197 in
L 8 - 9 mm / 0.33 in 3 L 8 - 9 mm / 0.33 in 3

1 400 V = rated voltage
6 kV = rated surge voltage
3 = pollution degree
(also see Section 14)
2 16 A, 85°C upper temperature limit (see
current-carrying capacity curve at www.wago.com)
3 Strip length, see packaging or instructions.
<_ 28,5 mm/ _> 1.12 in <_ 28,5 mm/ _> 1.12 in 4 See application notes for:
Test plug modules, page 290
Insulation stop, page 293
Staggered jumper, page 295
Push-in type wire jumper, page 295
<___ 46 mm/1.81 in ___> <___ 46 mm/1.81 in ___> 5 Note:
<____________ 87,5 mm/3.44 in _____________> <____________ 87,5 mm/3.44 in _____________> 2-conductor female plug is not suitable.
Pack. Pack. Accessories
Item No. Item No.
Unit Unit
1-conductor/1-pin carrier terminal block with 2 1-conductor/1-pin carrier terminal block with 2
jumper positions, jumper positions and with orange separator plate,
for DIN 35 rail, acc. to EN 60715, gray for DIN 35 rail, acc. to EN 60715, gray Test plug,
2-pole 769-181 50 4-pole, with 500 mm cable,
11.1 mm wide 769-182/769-314 10 2 mm Ø
6-pole, red 210-136 50
16.1 mm wide 769-183/769-314 5 Test plug,
8-pole, with 500 mm cable,
21.1 mm wide 769-184/769-314 5 2.3 mm Ø
10-pole, yellow 210-137 50
26.1 mm wide 769-185/769-314 5 Test plug adapter, 5 mm wide,
for terminal blocks 1.5 - 4 mm²,
for 210-137 test plug 2.3 mm Ø
gray 280-404 100 (4x25)
769 Series Accessories 1-conductor female plug,
Appropriate marking system: 5 straight
Miniature WSB (see Section 13) gray 769-101 200
End and intermediate plate, 1.1 mm thick Staggered jumper,
orange 769-312 100 (4x25) 4 insulated,
gray 769-311 100 (4x25) Spacing: 5 mm,
I N 24 A
Separator, oversized, 1.1 mm thick from 1 to 2 780-452 100 (4x25)
orange 769-314 100 (4x25) from 1 to 3 780-453 100 (4x25)
from 1 to 4 780-454 100 (4x25)
from 1 to 5 780-455 50 (2x25)
Insulation stop, from 1 to 6 780-456 50 (2x25)
4 5 pcs/strip, from 1 to 7 780-457 50 (2x25)
0.08 - 0.2 mm² “s” (0.14 mm² “f-st”) from 1 to 8 780-458 50 (2x25)
white 769-470 200 (8x25)
Insulation stop, Push-in type wire jumper,
4 5 pcs/strip, 4 insulated,
0.25 - 0.5 mm² I N 9 A,
light gray 769-471 200 (8x25) wire size 0.75 mm²
Insulation stop, L = 60 mm 249-125 10
4 5 pcs/strip, L = 110 mm 249-126 10
0.75 - 1 mm² L = 250 mm 249-127 10
dark gray 769-472 200 (8x25)
Coding pin, Protective warning marker,
for coding female plugs with high-voltage symbol, black,
orange 769-435 100 (4x25) for 5 terminal blocks
yellow 280-415 100 (4x25)
Adjacent jumper, insulated, Test plug module,
I N = I N terminal block 4 can be snapped together,
gray 280-402 200 (8x25) 5 mm wide
gray 280-418 100 (4x25)
Alternate jumper, insulated, Spacer module,
I N = I N terminal block can be snapped together,
gray 280-409 100 (4x25) 5 mm wide
gray 280-419 100 (4x25)
Certification organizations can be found in the overview on pages 622 and 623.