Page 17 - Parker - Energy Products Division - Multitube (Instrument and Heat Trace Tubing Products)

Chemical Processing and Refineries
Catalog Number 4200-M-2
Back to Table of Contents

Steam Trace Accessory Selections

SK-612, SK-630
or SK-696
RTV or ESB RTV or ESB
Temptube ® Temptube ®
Steam Supply Condensate Return
SK-612 or SK-630 Steam Trace SK-612 or SK-630
PTFT PTFT

End Sealant
Description: Parker end sealant is a paste material
which becomes a tough, rubbery seal upon exposure
to air. Total curing takes about 24 hours, at which time
it has excellent resistance to weather, ozone, oil, many
chemicals and extreme temperatures “-75°F (-60°C) to
+400°F (204.4°C). High temperature sealant to 500°F
(260°C) available.
RTV-103BLK RTV-103BLK
– 2.8 oz. tube, 400°F 10.3 – 10.1 oz. cartridge,
To order: Specify Parker room temperature vulcanizing
(204.4°C) rated 400°F (204.4°C) rated
(RTV) end sealant part numbers:

Important: All Parker steam products must have sealed
ends to prevent contamination of insulation. Parker
product ends are sealed at the factory and it is important
that these seals be maintained during storage and that
they are sealed upon installation. We will not assume
liability for any corrosion or damage to the product
caused by such contamination.
RTV-106RED – 2.8 oz.
tube, high temperature
500°F (260°C)
Heat Shrinkable Boots (HSBs)
Parker heat shrink boots (HSB) are designed to
prevent moisture from entering the ends of Parker
Temptrace™ bundles. The dash number represents

the number of breakouts in each boot. The boots can
be used on 1/4", 3/8", or 1/2" tubes, or as a seal for
the heating cable.

HSB-2 HSB-1

PTFT Feed–Through Seal Kits
®
Selected specifically for use with Parker Temptube
and Temptrace™ bundles. PTFT kits provide an
®
excellent method in which to Install Parker Temptube
and Temptrace™ bundles in instrument enclosures
and cabinets.

PTFT – 1.50 PTFT – 2.00

Parker Hannifin Corporation
13 14 Energy Products Division