Page 18 - Parker - Energy Products Division - Multitube (Instrument and Heat Trace Tubing Products)

Chemical Processing and Refineries Catalog Number 4200-M-2

Back to Table of Contents

End Seal Boot (ESB) Kit
Parker end seal boot (ESB) kits are designed to prevent
®
moisture from entering the ends of Parker Temptrace bundles.
Each boot allows up to three tube breakouts. These breakouts
have marks to specify where to cut for either a 1/4", 3/8" and
1/2" tube.
Breakout
Each Kit contains:
(2) End Seal Boots
(6) Stainless Steel Hose Clamps
(2) Plastic Hose Clamps (1.47" - 1.72")
(2) Plastic Hose Clamps (1.73"-2.02")
(2) Mastic Sealant (3/4" wide x 9" long)

Splice Kit SK-612
The SK-612 has been designed to provide long life, weatherproof thermal
insulation and jacket over a tube fitting or instrument connection.

There is sufficient material in each SK-612 Splice Kit to insulate two (2) splices or
bundle ends.

Each Kit contains:
(2) 8"x 8" self-sealing rubber sheets with a 6" x 12" fiberglass pad.
(1) Roll waterproof sealing tape.

Splice Kit SK-630
The SK-630 has been designed to provide long life, weatherproof thermal
insulation and jacket over a tube fitting or instrument connection.

There is sufficient material in each SK-612 Splice Kit to insulate two (2) splices or
bundle ends.

Each Kit contains:
(2) 8"x 30" self-sealing rubber sheets with a 6" x 30" fiberglass pad.
(1) Roll waterproof sealing tape.

Splice Kit SK-696
The SK-696 has been designed to provide long life, weatherproof thermal
insulation and jacket for longer lengths up to 96" (8ft.) of bundles or multiple
connections.

Each Kit contains:
(1) Roll 8"x 96" self-sealing rubber sheet.
(1) Roll 6" x 96" fiberglass pad.
(1) Roll waterproof sealing tape.

Parker Hannifin Corporation
15 Energy Products Division 16