Page 70 - Linde - VT1 Modular, modular system for LSC manifold valve plates

5 | Assembly of System components. VT1ED with pilot control

VT1ED with pilot control combination DMV3/24 or DMV3/12 for separate electro-hydraulic
actuation of directional control valves at positions 1.X.0 and 1.X.1.

This combination is used for electro-hydraulic actuation of a directional control valve fitted at position 1.X.0 on a VT1ED expansion
module and for electro-hydraulic actuation of a directional control valve fitted at position 1.X.1, independently of each other. The
pilot control combinations are bolted onto the front of the VT1ED in pairs. You must ensure that the O-rings of the respective mo-
dules with the associated Pst, T0 and p x/y holes fit on top of each other.
st

VT1ED DMV3/24 DMV3/12 VT1ED/DMV3/24 VT1ED/DMV3/12

Pos. 1.X.0

+ =

Pos. 1.X.1

During assembly or installation, proper handling
4x O-Ring-7,5x2-V80 each of the O-rings must be ensured.

4x ZS-M6x75-912-8.8
Mounting bolts, Tightening torque 9,5Nm

circuit diagram

VT1ED/DMV3/24 VT1ED/DMV3/12

Port Port size
Pos. 1.X.0 function
Yx1.X.0,
Yy1.X.0, 24V/26W/100%ED/IPX9K/IPX7
Yx1.X.1, Deutsch connector
Yy1.X.1
Yx1.X.0,
Yy1.X.0, 12V/26W/100%ED/IPX9K/IPX7
Yx1.X.1, Deutsch connector
Yy1.X.1

Pos. 1.X.1

Weight [kg] ca. 23,0
Dimensions [BxHxT] 120 x 110 x 454 mm

70