Page 68 - Linde - VT1 Modular, modular system for LSC manifold valve plates

5 | Assembly of System components. VT1ED with pilot control

VT1ED with pilot control combination DMV2ABP/24 or DMV2ABP/12 for electro-hydraulic ac-
tuation at position 1.X.0 and for hydraulic actuation at position 1.X.1.

This combination is used for electro-hydraulic actuation of a directional control valve fitted at position 1.X.0 on a VT1ED expansion
module and for hydraulic actuation of a directional control valve fitted at position 1.X.1 on a VT1ED expansion module. The ports to
be used for hydraulic actuation are located on top of the directional control valve. The pilot control combinations are bolted onto
the front of the VT1ED in pairs. You must ensure that the O-rings of the respective modules with the associated Pst, T0 and p x/y
st
holes fit on top of each other.

DMV2ABP/24 VT1ED/DMV2ABP/24
VT1ED DMV2ABP/12 VT1ED/DMV2ABP/12

Pos. 1.X.0

+ =

Pos. 1.X.1

During assembly or installation, proper handling
16x O-Ring-7,5x2-V80 of the O-rings must be ensured.

4x ZS-M6x75-912-8.8
Mounting bolts, Tightening torque 9,5Nm

circuit diagram

VT1ED/DMV2ABP/24 VT1ED/DMV2ABP/12

Pos. 1.X.0 Port Port size
function
Yx1.X.0, 24V/26W/100%ED/IPX9K/IPX7 Deutsch
Yy1.X.0, connector
Yx1.X.0, 12V/26W/100%ED/IPX9K/IPX7 Deutsch
Yy1.X.0, connector

Pos. 1.X.1

Weight [kg] ca. 20,7
Dimensions [BxHxT] 120 x 110 x 366 mm

68