Page 213 - Icon Ridge Hardware & Fixing Technology Catalog

Fixing technology

Bolt-anchors R-XPTII-A4, stainless steel A4

Extract from the application conditions in the ETA-12/00021 approval
Overall safety factor taken into account according to ETAG ( γM and γF)

Loads and characteristic values Bolt-anchors R-HPTII-A4 M8 M10 M12 M16

Characteristic transverse load in uncracked concrete
[kN] 9,0 16,0 25,0 39,5
C20/25 N Rk,p
Increasing factors for N Rk,p
C30/37 1,46 1,37 1,20 1,18
C40/50 1,91 1,74 1,40 1,37
C50/60 2,36 2,10 1,60 1,55
Characteristics shear load capacity V Rk,s [kN] 11,7 18,5 24,6 45,5
Characteristic bending torque M Rk,s [Nm] 22 45 72 180
Axial spacing and edge clearances
Effective anchoring depth h ef [mm] 47 59 68 85
Axial spacing s cr ,N [mm] 141 177 204 255
Edge clearance ccr,N [mm] 71 89 102 128
Minimum axial spacing cracked / uncracked concrete s min [mm] 65 90 110 170
Minimum edge clearance cracked / uncracked concrete c min [mm] 50 60 85 90
Minimum component thickness h min [mm] 100 120 140 170
Axial spacing and edge clearances at reduced anchoring depth
Effective anchoring depth h ef [mm] 32 39 48 65
Axial spacing s cr ,N [mm] 96 177 144 195
Edge clearance ccr,N [mm] 48 59 72 98
Minimum axial spacing cracked / uncracked concrete s min [mm] 65 115 150 190
Minimum edge clearance cracked / uncracked concrete c min [mm] 50 80 100 120
Minimum component thickness h min [mm] 100 120 100 130
Mounting data
Hole diameter d o [mm] 8 10 12 16
Through-hole in the mounted part d f [mm] 9 11 13 18
Min. drilled hole depth h 0 [mm] 55/40 1) 69/49 1) 80/60 1) 100/80 1)
Anchoring torque T inst [Nm] 15 30 50 100

1) Reduced anchoring depth (note reduced loads)

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 213