Page 215 - Icon Ridge Hardware & Fixing Technology Catalog

Fixing technology

Wedge Anchor B, Steel

Extract from the application conditions in the ETA-01/0013 approva
Anchor capacities, transverse load without influence of axial and edge distances.
Total safety factor according to ETAG considered ( γ M und γ F )

Loads and characteristic values wedge anchor B M 6 M 8 M 10 M 12 M 16 M 20
Non-cracked concrete
Admissible transverse load C20/25 Approval N [kN] 3,0 4,0 5,3 9,9 13,9 19,9
C25/30 Approval N [kN] 3,3 4,4 5,9 11,0 15,4 21,9
C30/37 Approval N [kN] 3,6 4,8 6,5 12,1 16,9 24,2
C40/50 Approval N [kN] 4,2 5,6 7,5 14,0 19,6 28,0
C50/60 Approval N [kN] 4,6 6,2 8,2 15,4 21,5 30,8
Admissible transverse load C20/25 Approval V [kN] 2,9 5,8 6,7 14,3 23,6 37,1
> C25/30 Approval V [kN] 2,9 6,3 7,3 14,3 23,6 37,1
Admissible bending moment Approval M[Nm] 5,1 13,1 25,7 44,6 99,9 195,0
Axis and edge distances
Anchoring depth h ef [mm] 40 44 48 65 82 100
Distinctive axis distance s cr [mm] 120 132 144 195 246 300
Characteristic edge distance c cr [mm] 60 66 72 98 123 150
Distinctive edge distance s min [mm] 40 50 55 75 90 105
Minimum edge distance c min [mm] 40 50 65 90 105 125
Minimum component thickness h min [mm] 100 100 100 130 170 200
Axial and edge distances for reduced anchoring depth
Anchoring depth, red. h ef [mm] 24 35 42 48 64 79
Distinctive axis distance s cr [mm] 120 132 144 195 246 300
Characteristic edge distance c cr [mm] 60 66 72 98 123 150
Distinctive edge distance s min [mm] 40 50 55 90 105 120
Minimum edge distance c min [mm] 40 50 65 105 125 145
Minimum component thickness h min [mm] 100 100 100 100 130 160
Assembly data
Drilling hole diameter d o [mm] 6 8 10 12 16 20
Clearance hole in the add-on part d f [mm] 7 9 12 14 18 22
Drilling hole depth h 1 [mm] 55/34 1) 65/55 1) 70/65 1) 90/70 1) 110/90 1) 130/110 1)
Torque when anchoring T inst [Nm] 8 15 30 50 100 200
Wrench size SW [mm] 10 13 17 19 24 30
1) Reduced anchoring depth (note reduced loads)

Technical data subject to change.
Availability subject to country specific rules and regulations. www.iconridge.com Source: Theo Förch GmbH & Co. KG 215