Page 24 - GuardII+ Series 4208 Platform SM User Manual

Installation

5.6.2. No Existing Flux or EV Card

Before installing the Flux card, the protective cover on the GuardII+ Platform SM card
connectors need to be removed. Loosen the thumbscrews holding the cover in place and
remove the cover from the enclosure; this is no longer required.

Figure 5-3 Remove SM Card Cover
Place the SM card on the chassis plate; make sure that the card is set against the
alignment pin on the chassis. Slide the card towards the top of the monitor; the guide screw
will help line up the card properly. Once lined up, push the card into place, and fasten the
thumbscrews to secure it.

18
www.irispower.com