Page 35 - GuardII+ Series 4208 Platform SM User Manual
P. 35
User Instructions
• Once the sensors are selected, the sensor sensitivity needs to be configured.
o Select the sensitivity for each sensor.
o The sensitivity of a current input is determined by the current shunt that is
connected to that input.
o The sensitivity of a voltage input is determined by the jumper setting in the
termination box.
Figure 6-11 Sensor Sensitivity
NOTE:
If the sensor sensitivities are not correct, measurements will still be
performed, and the monitor will record data, but that data will not be
accurate.
6.2.4. Attach Monitor
Once sensors are added to the Asset, the GuardII+ needs to be attached.
• Select the Asset and press ‘Add Device’.
29
www.irispower.com
