Page 48 - GuardII+ Series 4208 Platform SM User Manual

User Instructions

Figure 6-28 IAM Device Utilities

6.7.1. Reboot Instrument
This utility will simply re-start the GuardII+. Once the utility is run, it will take a few minutes
before the monitor will start running measurements again.

6.7.2. Delete Archives

This utility will delete all the Archives that are currently saved on the GuardII+. This does
not affect current state of the Triggers or measurements that have already been downloaded
and/or imported into IAM; it only deletes the measurement data that is stored in the monitor.
WARNING:
This will delete the Archives for all monitoring technologies. Once the
Archives are deleted in the GuardII+, they cannot be restored; do not use
this utility unless you are sure that you do not need the Archived data.

6.7.3. Clear Trigger History
This utility will reset the Trigger status for all monitoring technologies; this will affect SM
data by resetting the current state of today’s measurements; effectively, this would be the same
as restarting the monitor. This does not affect the Archived or downloaded measurements; it only
resets the Triggers.
WARNING:
Once the Triggers are reset in the GuardII+, they cannot be restored back
to the previous status; do not use this utility unless you are sure that you
want to start the Triggers over again.

42
www.irispower.com