Page 64 - APEX MRO Products

ADHESIVES, SEALANTS & TAPES Industrial Safety Welding Oilfield Construction

Putty

ADHESIVES, SEALANTS & TAPES Minute Mend™ Epoxy Putties Bronze Putty (BR)

Features: F•eaBtruornezse:‑filled epoxy putty for repairing bronze

• Specially formulated to bond to both wet and dry and brass bushings, shafts, castings, and parts.

surfaces and can be applied under water. • Repairs and rebuilds areas where brazing

• 2‑part epoxy putty packaged in a 1‑piece stick. would be undesirable or impossible.
• Ready to use in less than one minute.
• Can be tapped, sawed, drilled, machined, stained, or painted. • Bonds securely to bronze alloys, brass,

Test & Approvals: Meets 1998 USDA guidlines for use copper, and ferrous metals.
in meat and poultry plants; Dielectric strength tested
by ASTM D‑149 • Uses conventional
Specific Gravity: 1.9
Stress Resistance: 800 psi (tensile) ‑ 1,000 psi (tensile) metalworking tools to machine, drill, tap, or grind.
Hardness: 65.0 Shore D
Applications: Multi‑Purpose • 35‑minute working time.
Applicable Materials: Ceramic; Concrete; Fiberglass; Glass; Plastic; Steel;
Wood; Aluminum Test & Approvals: Chemical resistance was tested by immersion
Full Cure Time @ Temp.: 24 h @ 77 °F for 30 days at 75 °F, after 7 days room temperature cure
Dielectric Strength: 300.0 V/mil Specific Gravity: 2.23
Resistance: Ester; Alcohol; Ketone; Salt; Halogenated Hydrocarbon Hardness: 85.0 Shore D
Applications: Bronze Parts/Equipment
Applicable Materials: Bronze; Most Metals
Full Cure Time @ Temp.: 16 h @ 75 °F
Dielectric Strength: 25.0 V/mil
Resistance: Ammonia; Kerosene; Sodium Hydroxide‑10%; Toluene

SKU Temp. Range Color SKU Temp. Range Color
125‑14070 250.0 °F Gray 230‑10260 250.0 °F Bronze

Aluminum Putty F Carbide Putty

F•eaAtluurmeisn:um‑filled epoxy putty for dependable •FeaStiulicreosn:e carbide‑filled epoxy

non‑rusting repairs to aluminum putty for economical protection
castings, machinery, and equipment against wear and abrasion.
widely used in HVAC applications.
• Excellent abrasion resistance in
• Excellent resistance to chlorofluorocarbons.
• Bonds to aluminum and many other metals. aggressive industrial environments.
• Fills porosity in aluminum castings.
• Can be machined drilled or tapped using conventional metalworking tools. • Handles particulates less than 1/16.
• Qualifies under DOD‑C‑24176B/(SH), Type II. • 50‑minute working time.
• 60‑minute working time.
Test & Approvals: Chemical resistance was tested by immersion for 30 days at
Test & Approvals: Chemical resistance was tested by immersion for 30 days at 75 °F, after 7 days room temperature cure
75 °F, after 7 days room temperature cure; Qualified per MIL‑DOD‑C‑24176B.
Specific Gravity: 1.7
Specific Gravity: 1.58
Stress Resistance: ‑
Hardness: 85.0 Shore D
Hardness: 85.0 Shore D
Applications: Multi‑Purpose
Applications: Multi‑Purpose
Applicable Materials: Aluminum; Most Metals
Applicable Materials: Most Metals
Full Cure Time @ Temp.: 16 h @ 75 °F
Full Cure Time @ Temp.: 16 h @ 75 °F
Dielectric Strength: 100.0 V/mil
Dielectric Strength: 200.0 V/mil
Resistance: Chlorinated Solvents; Hydrochloric Acid‑10%; Kerosene
Resistance: 1,1,1‑Trichloroethane; Ammonia; Gasoline (Unleaded); Potassium
Hydroxide 40%; Sodium Hydroxide 50%; Sodium Hypochlorite; Toluene;
Trisodium Phosphate

SKU Temp. Range Color SKU Temp. Range Color
230‑10610 250.0 °F Aluminum 230‑10050 250.0 °F Grey

62 ORSNASCO.COM © 2016