Page 65 - APEX MRO Products

ADHESIVES, SEALANTS & TAPES

Industrial Safety Welding Oilfield Construction

Ceramic Repair Putty Plastic Steel® ADHESIVES, SEALANTS & TAPES

•FeaTtruorweesl:able, alumina‑filled epoxy compound 5 Minute® Putty (SF)

for rebuilding, smoothing, and protecting •FeaFtausrte‑csu: ring, steel‑filled epoxy for emergency
processing equipment exposed to corrosion,
erosion, cavitation, chemicals and acids. repairs at temperatures as low as 40°F.

• Excellent for filling voids and • Cures to a tough, steel‑filled material.
• Can be machined, drilled, tapped, or sanded.
rebuilding metal castings. • 5‑minute working time.

• 25‑minute working time. Specific Gravity: 2.8
• Qualifies under Mil Spec Hardness: 85.0 Shore D
Applicable Materials: Concrete; Most Metals
DOD‑C‑24176B(SH) Type I II. Full Cure Time @ Temp.: 1 h @ 75 °F
Dielectric Strength: 35.0 V/mil
Test & Approvals: Shear Strength Tested According to ASTM D1002; Cured Resistance: Kerosene; Ammonia; Water; Leaded Petrol; Saltwater
Shrinkage Tested by ASTM D2566; Compression Strength Tested According
to ASTM D695; Dielectric Strength Tested According to ASTM D149; Cured SKU Temp. Range Color
Hardness Tested According to ASTM D‑2240; Chemical Resistance was Tested 230‑10240 200.0 °F Dark Grey
by Immersion for 30 Days at 75 °F, After 7 Days Room Temperature Cure

Specific Gravity: 1.69

Hardness: 90.0 Shore D

Applicable Materials: Most Metals

Full Cure Time @ Temp.: 16 h @ 75 °F

Dielectric Strength: 370.0 V/mil

Resistance: Sodium Hypochlorite‑5%; Triosodium Phosphate‑5%; Trisodium
Phosphate‑5%; Hydrochloric Acid‑10%

SKU Temp. Range Color
230‑11700 350.0 °F Dark Blue

Flexane® 80 Putty Plastic Steel® Putty (A)

F•eaTtruorweesl:able urethane for repairing and lining •FeaTthuereosr:iginal metal‑filled epoxy putty.
• Used for hundreds of routine
process equipment exposed to wear, impact,
abrasion, vibration, and expansion/contraction. maintenance, production, and tooling applications.

• Mixes easily and trowels on smoothly. • Bonds to most metals concrete and some plastics.
• Cures to a tough, medium‑hard rubber . • Cures at room temperature and forms a tough durable metallic
• Flexane® Primers are recommended for maximum
mass that can be drilled, tapped, machined, or painted.
adhesion to metal, rubber, and concrete surfaces.
• Excellent resistance to oil gasoline water and many chemicals.
• 20‑minute working time. • Ideal for patching and repairing areas where welding or

Test & Approvals: Dielectric strength tested according to ASTM D149; Tensile brazing would be undesirable or impossible.
strength tested according to ASTM D412
Specific Gravity: 1.1 @ 77 °F • 45‑minute working time.
Hardness: 87.0 Shore A
Applications: Trowelable Repair Test & Approvals: Chemical resistance was tested by immersion for 30
Applicable Materials: Concrete; Fiberglass; Most Metals; Rubber; Wood days at 75 °F, after 7 days room temperature cure; MIL; Qualifies under
Full Cure Time @ Temp.: 7 d @ 75 °F DOD‑C‑24176B(SH), Type I
Dielectric Strength: 350.0 V/mil Specific Gravity: 2.8
Resistance: Tear; Aluminum Sulfate 10%; Hydrochloric 36%; Potassium Hardness: 85.0 Shore D
Hydroxide 40%’ Phosphoric 10%; Sodium Hydroxide 50% Applicable Materials: Concrete; Most Metals
Full Cure Time @ Temp.: 16 h @ 75 °F
Dielectric Strength: 30.0 V/mil
Resistance: Chlorinated Solvents; Hydrochloric Acid‑10%; Kerosene; Water;
Leaded Petrol; Propylene Glycol; Mineral Spirits; Sulfuric Acid‑10%

SKU Temp. Range Color SKU Temp. Range Color Packing Type
230‑15820 120.0 °F; 180.0 °F Black 230‑10110 250.0 °F Dark Grey Can
230‑10120 250.0 °F Dark Grey Kit

© 2016 1.800.678.6577 63