Page 68 - APEX MRO Products

ADHESIVES, SEALANTS & TAPES

Industrial Safety Welding Oilfield Construction

ADHESIVES, SEALANTS & TAPES 648™ High Strength 680™ Retaining Compound

Rapid Cure Retaining Compound Features:

F•eaRtaupriedsc: ure retaining compound performs best • High strength, high viscosity room temperature

for clearance or interface parts. curing adhesive works hard to get the job done.

• Provides excellent performance for dynamic, • Used to join fitted cylindrical parts.
• Allows relaxed machining tolerances, and replaces
axial and radial loads.
clamp rings, set screws, and snap rings.
• Bonds through contaminants including oils,
• Recommended for retaining shafts, gears,
cutting and corrosion protection fluids.
pulleys and similar cylindrical parts.
• Cures on metals without an activator. Color: Green
Gap Fill: 0.015 in
Test & Approvals: NSF/ANSI 61; CFIA Temp. Range: ‑65.0 °F ‑ 300 °F
Color: Green Shear Strength: 4,000 psi
Gap Fill: 0.006 in Fix Cure Time @ Temp.: 10 min @ 77 °F
Temp. Range: ‑65 °F ‑ 355 °F Full Cure Time @ Temp.: 24 h @ 77 °F
Shear Strength: 3,900 psi Curing Method: Anaerobic
Fix Cure Time @ Temp.: 3 min @ 77°F Physical Form: Liquid
Full Cure Time @ Temp.: 24 h @ 77°F Applications: Bearing; Joint; Fan
Curing Method: Anaerobic Odor/Scent: Mild
Physical Form: Liquid Resistance: Brake Fluid; Motor Oil; Unleaded Gasoline
Resistance: Acetone; B100 Bio‑Diesel; Brake Fluid; DEF (AdBlue®); Ethanol;
Motor Oil (5W40‑Synthetic); Unleaded Petrol; Water/Glycol 50/50 SKU Capacity Vol. Packing Type
442‑1835201 50 mL Bottle

Sealants

SKU Capacity Vol. Packing Type
442‑1835920 50 mL Bottle

660™ Quick Metal® Minimal Expanding Foam Sealants

Retaining Compound Features:

•FeaAtucrreeas:my, non‑running adhesive/sealant. • Designed to fill, seal, bond, retrofit, insulate, and deaden
• Repairs worn machine parts.
• Restores correct fit to mating assemblies. sound in and around cracks and cavities.

Test & Approvals: CFIA • Forms a permanent, waterproof and airtight bond to
Color: Silver
Gap Fill: 0.02 in masonry, wood, glass, metal, and most plastics.
Temp. Range: ‑65 °F ‑ 300 °F
Shear Strength: 3,300 psi • Stops drafts, dust, moisture, insects and rodents.
Fix Cure Time @ Temp.: 20 min @ 77 °F • When cured, foam can be sanded, painted or stained.
Full Cure Time @ Temp.: 24 h @ 77 °F • The low expansion formula expands 50% when fully cured.
Curing Method: Anaerobic • Cured foam insulates to R‑5 for each inch of foam.
Physical Form: Paste; Liquid • UL classified as a caulking sealant.
Applications: Joint • Foam and propellant are non‑flammable.
Odor/Scent: Mild • Convenient 360º valve ‑ can be sprayed from any position.
Resistance: Ethanol; Motor Oil; Unleaded Petrol • Reusable for up to 30 days after initial use.

Test & Approvals: UL
Temp. Range: ‑200 °F ‑ 200 °F
Color: Off‑White
Resistance: Waterproof; Airtight
Full Cure Time @ Temp.: 12 h @ 77 °F; 24 h @ 77 °F
Specific Gravity: 1.2
VOC: 2.9%, 35 g/L

SKU Capacity Vol. Packing Type SKU Container Size Packing Type
442‑66040 50 mL Tube 125‑14077 16 oz Aerosol Can

66 ORSNASCO.COM © 2016