Page 1000 - 2006 HARLEY FLSTCI SERVICE MANUAL

6.5 1 6-17

2

Screw (2) @ 84-108 in-lbs (9.5-12.2 Nm) Figure 6-27. Transmission Sprocket Figure 6-28. Transmission Sprocket Tools Figure 6-29. Axle Adjusters (Left Side Shown)
3 2006 Softail: Drive

4 2

5 Lockplate Sprocket nut Sprocket Main drive gear 1 Locknut wrench Sprocket locking tool

d0117x6x 1. 2. 3. 4. 5. d0409x6x 1. 2. 7523

PRIMARY 6.2 PRIMARY CHAIN- WRENCH (1)
TRANSMISSION SPROCKET

SPECIALTY TOOL Transmission sprocket tool Mainshaft locknut wrench Remove primary chaincase cover. See under a. See Figure 6-27. Remove both screws (1) and lock- Secure sprocket using TRANS- MISSION SPROCKET TOOL (Part No. HD-41184). Remove the sprocket nut using MAINSHAFT LOCK- NUT WRENCH (Part No. HD-94660-37B). NOTE See Figure 6-29. Loosen rear axle and adjusters so rear wheel can be moved all the way forward. Remove belt CLEANING AND INSPECTION Clean sprocket of all grease and dirt using solvent. Clean Inspect belt and sprocket. See 1.15 REAR BELT AND SPECIALTY TOOL Transmission sprocket tool Mainshaft locknut wrench

REMOVAL PART NO. HD-41184 HD-94660-37B CHAINCASE COVER CASE. Remove transmission sprocket. plate (2). Figure 6-28. See Sprocket nut has a left hand thread. from sprocket as you remove sprocket. and prime main drive gear threads. SPROCKETS. Inspect both main drive gear seals. INSTALLATION PART NO. HD-41184 HD-94660-37B Place transmission sprocket in position. facing transmission sprocket. Figure 6-28. See sprocket. shaft.

HOME 1. 2. b. c. 3. 1. 2. 3. 1. 2. 3. 4.