Page 998 - 2006 HARLEY FLSTCI SERVICE MANUAL

6-15

2006 Softail: Drive

Against Bearing Figure 6-23. Clutch Shell Retaining Ring with Flat Side Figure 6-24. Pressing Bearing From Clutch Shell See Figure 6-21. Turn assembly over so that the sprocket side is up. Install retaining ring in groove of clutch hub. Place clutch assembly on bench oriented with the Soak all friction and steel plates in FORMULA+ TRANS- MISSION AND PRIMARY CHAINCASE LUBRICANT for

sprocket side down. at least 5 minutes.

d0357x6x d0358x6x

4. 5. 6.

clutch shell over so that the
See Figure 6-22. Supporting clutch shell in same orien-
d0356x6x
Figure 6-22. Pressing Clutch Hub From Bearing

hub from bearing in clutch shell. tation, use arbor press and a suitable press plug to press Turn Figure 6-23. sprocket side is down. Remove retaining ring from groove in clutch shell bore. See Figure 6-24. Turn clutch shell over so that sprocket side is up. Using arbor press and a suitable press plug, press on inner race to remove bearing from clutch shell Continue with CLEANING AND INSPECTION. Orient clutch shell in arbor press with sprocket side down. Be sure to support clutch shell bore on sprocket side. Using a suitable press plug, press against outer race until bearing contacts shoulder in c

HOME 3. See 4. 5. bore. 6. Assembly 1. 2. 3.