Page 999 - 2006 HARLEY FLSTCI SERVICE MANUAL

d0360x6x

5
6 5
Figure 6-25. Clutch Stackup Bolts (6) (metric)@ 90-110 in-lbs (10.2-12.4 Nm) Figure 6-26. Assembled Clutch

1 4

4
2 3 Narrow friction plate
Clutch shell Clutch hub Damper spring seat Steel plate Damper spring 1 Diaphragm spring Jam nut Adjuster screw Retaining ring

1. 2. 3. 4. 5. 6. d0100x6x 3 2 1. 2. 3. 4. 5.

Install damper spring seat on clutch hub so that it seats
6.2 PRI-
See Figure 6-25. Install the narrow friction plate on the
clutch hub engaging tabs on plate with slots in clutch
under

inboard of narrow friction plate. Install damper spring on clutch hub with the concave side up (facing opposite damper spring seat). Install a steel plate and then a friction plate on the clutch hub. Install seven remaining sets in the same manner, alternating between steel plates and friction plates. Install pressure plate on clutch hub aligning holes in plate with threaded bosses on hub. See Figure 6-26. Seat diaphragm spring (1) in recess of pressure plate with the concave side down. Align holes in diaphragm spring retainer with threaded bosses on clutch hub. Tabs on spring retainer contact flats on inboard side of bosses. Install six bolt

shell. mary chaincase leaks. See
HOME 7. 8. 9. 10. 11. 12. 13. 14. 15. 6-16