Page 10 - McDonald's Samsung Galaxy Tablet_Shopfitting V1.0_Neat

Secure a 85mm length of steel threaded rod to each of the 4 holes at the base of the stalk .

Attach a 25mm washer to each screw thread.
Apply Lock Thread to each screwed rod. Secure in place using an M5 Nylon Locking Nut.

To ensure the Nylon Locking Nut is in place properly against the Surface Mounting Kit - hold the M5
Nylon Locking Nut in place using a small wrench with M5 attachment. Then using an electric
screwdriver with the correct screw fitting in place, screw into place until the Locking Nut is secured
into place flush against the bench surface.

Repeat as above for all 4 screws at each position.

Once complete – check the stability of the poles to ensure that they are solid & there is no movement
between the Secure Mounting Base & Static Stalk.

10 Samsung Galaxy Tablet Shopfitting Standards