Page 8 - McDonald's Samsung Galaxy Tablet_Shopfitting V1.0_Neat

Attach the Static Stalk inc Surface Mounting Kit to the tablet table using 4 x 85mm M5 Countersunk
Machine Screw.

If the depth of your surface is deeper then specified use the correct length of screw required.

Attach a 25mm washer to each screw thread.

Apply Lock Thread to each screw thread. Secure in place using an M5 Nylon Locking Nut.

Countersunk Machine Screw – M5 x
85mm

25mm round washer

M5 Nylon Locking Nut

To ensure the Nylon Locking Nut is in place properly
against the Surface Mounting Kit - hold the M5 Nylon
Locking Nut in place using a small wrench with M5
attachment. Then using an electric screwdriver with the
correct screw fitting in place, screw into place until the
Locking Nut is secured into place flush against the bench
surface.

Repeat as above for all 4 screws at each position.

Once complete – check the stability of the poles to ensure that they are solid & there is no movement
between the Secure Mounting Base & Static Stalk.
Attach the plate that covers the screws within the Surface Mounting Kit.
Do this NOW – if you don’t do it at this point you will need to de-install the unit to get this plate in
place

Secure this plate down using clear silicone.

8 Samsung Galaxy Tablet Shopfitting Standards