Page 16 - Toro Product Guide_2020.cdr

Snow Blade SBL-7200

Fits Toro Groundsmaster 7200, 7210 & 360

Features:
- The heavy-duty mould board is formed from 3/8" steel plate and is
welded to an upper blade constructed from 3/16" plate that is gusseted
with four laser cut 3/8" steel plate ribs.
- The blade features a reversible, abrasion resistant, 3/8" x 6" bolt-on
steel cutting edge.
- The main frame and pivot frame are constructed from laser cut 3/8"
and 1/2" high tensile steel.
A-frame Mount
Support Bar - The 1-1/2" OD steel center pivot pin is supported by two brass
bushings and is serviceable with a grease nipple.
Cross Over Relief Valve
- The blade has two hydraulic rams. Each ram has a 2" bore and a 1"
shaft, supported by two 1" zinc dipped pins with grease nipples.
- The blade’s spring trip system is outfitted with six tension springs
which dramatically decreases chances of blade damage. Spring
tension can be changed by adjusting a jam nut on the bottom spring
hanger.
- The snow blade is also outfitted with an adjustable crossover relief
valve that enables the broom to transfer hydraulic oil from one cylinder
to the other in the event an obstruction is contacted, this further helps
Adjustable Adjustable Skid Shoe prevent blade or property damage.
Storage Stand - The unit comes complete with premium quality hydraulic hoses and
1/4" pioneer couplers.
- Zinc dipped storage stand to assist with mounting and storage.
- Blade aptitude can be adjusted in seconds by means of a turnbuckle
style top-link. This allows the operator to periodically make
adjustments to ensure the center pivot frame of the blade is
constantly level with the surface being bladed, helping to increase
blade performance and even blade wear.
- The A-frame mount is constructed of 1/4" laser cut steel and reinforced
Adjustable Turnbuckle
Top Link & Center Pivot with 3/8" plate. The A-frame mount is secured to the pivot frame using
Frame two 1" bolts. The A-frame is secured to the tractor with a 5/8" hitch pin.
To further increase the stability and rigidity of the snow blade, an
additional 1/2" bolt on support bracket at the bottom of the A-frame.
This support plate dramatically increases blade performance.
- Adjustable skid shoes help protect the grading surface from damage
and are adjusted using spacers.
- Frame and blade are sand blasted clean prior to receiving a two part
black self-priming epoxy paint.

Mould Board Trip Springs
& Cutting Edge
Specifications:

Overall Blade Width @
Model # Length Height Height Width Full Angle Weight
SBL-7200/360-55 32" 19.85" 22" 55" 47.63 350 lbs
16 SBL-7200/360-60 32" 19.85" 22" 60" 51.95" 375 lbs