Page 14 - Toro Product Guide_2020.cdr

Snow Blade SBL-3280D

Fits Toro Groundsmaster 3280D

Features:
- The heavy-duty mould board is formed from 3/8" steel plate and is
welded to an upper blade constructed from 3/16" plate that is gusseted
with four laser cut 3/8" steel plate ribs.
- The blade features a reversible, abrasion resistant 3/8" x 6" bolt-on
steel cutting edge.
- The main frame and pivot frame are constructed from laser cut 3/8"
high tensile steel.
- The 1-1/2" OD steel center pivot pin is supported by two brass
Mould Board
& Cutting Edge bushings and is serviceable with a grease nipple.
- The blade has two hydraulic rams. Each ram has a 2" bore and a 1"
shaft, supported by two 1" zinc dipped pins with grease nipples.
- The blade’s spring trip system is outfitted with six tension springs
which dramatically decreases chances of blade damage. Spring
tension can be changed by adjusting a jam nut on the bottom
spring hanger.
- The unit comes complete with premium quality hydraulic hoses.
(Additional hose kit and mounting bracket may be required.)
- The snow blade is also outfitted with an adjustable crossover relief
valve that enables the broom to transfer hydraulic oil from one
cylinder to the other if an obstruction is contacted, this further helps
Trip Springs & prevent blade or property damage.
Tensioner - The zinc dipped storage stand assists with mounting and storage.
- Blade aptitude can be adjusted in seconds by means of a turnbuckle
style top-link. This allows the operator to periodically make adjustments
to ensure the center pivot frame of the blade is constantly level with the
surface being bladed, helping to increase blade performance and even
blade wear.
- The mount frame is constructed of 3/8" laser cut steel. The mount is
secured to the pivot frame using two 1" bolts and further connected to the
tractor with two wedge plates and 1/2" bolts. These support plates
dramatically increase blade performance and stability.
- Adjustable skid shoes help protect the blading surface from damage
and are adjusted using spacers.
Adjustable - Frame and blade are sandblasted clean prior to receiving a premium
Storage Stand
black powder coat paint finish.

Specifications:

Overall Blade Width @

Model # Length Height Height Width Full Angle Weight
SBL-3280D-60 46-1/2" 19.85" 22" 60" 56-1/2" 450 lbs

Adjustable Skid Shoe

14